-
Anonymous users2024-01-24It is best to brush the primer twice and the topcoat three times. The feel will be very good, and the flexibility and hardness of the paint film can reach a more ideal state.
-
Anonymous users2024-01-23The best process should be 3-4 primer sanding (preferably a sander) and then 2 topcoats. The key to white paint is to deal with the gaps (putty should be good).
-
Anonymous users2024-01-22It depends on which kind of white paint you use? If it is extremely white, it needs to be reflective, and it needs to be painted several times. Until the surface is shiny, if it is white, it should be treated to a matte state, it needs to be done 2-3 times, and then painted with a roller with absorber paint.
-
Anonymous users2024-01-21It's usually one bottom and two sides. Polishing 3 or so and then brush a side of the topcoat. Grinding is important. If it is uneven, it will be uneven. And the second coat of topcoat should not be too thick, or it will not feel like a sticky plaster.
These two are decoration materials, mainly depending on your use, solid wood multi-layer generally with flooring, Aosong board as a board, their use is different, as decoration materials are good!
Yes, sand it with paper skin first, sand off the rough surface and then wax.
The position of the groove is not necessarily the seam position, and some should be docked well, without seams, and seams should be left in the middle or at three points. In addition, the remaining seams should be better in a V-shaped way - natural and without great depth.
With Ausson, you can paint the white you want, while veneer is generally not needed! In addition, the problem of Aosong board, Ousong board, these two names are not product names, is the name of the trade, there are a lot of people, and they are also very professional, however, there are some misunderstandings, Aosong board is MDF, the company that introduced Yinsen into the name of the bridge is only, Ousong board is the same, the English abbreviation OSB, is the oriented strand board, Ousong board is the name of the introduction of Beixin, I don't understand the want to plagiarize Beixin, and I don't understand the meaning of the name, ridiculous! Also, Dongyi Tanfeng does not eliminate Ousong board, there are other reasons, and it will not be that Aosong board is more environmentally friendly than it, and the details are not table!
It should be filled with putty to shoot nail holes, and after filling, it needs to be polished and smoothed, and the putty will definitely burst!! Putty plus white glue will play an explosion-proof role, but the effect is not good, and there will be problems after a long time!!