-
Anonymous users2024-01-24Solid wood splicing board is a different structural form, the solid wood narrow board is assembled into the required width of the board, such as solid wood countertop, solid wood chair seat, etc. Different splicing methods bring different ornamental effects, the conventional thickness of solid wood panels: 16-25mm for desktop and drawer panels, 30-50mm for thick desktops, 6-12mm for panels, and 10-15mm for drawer side panels and drawer backs.
In order to minimize the shrinkage and warping of the panels, the width of the solid wood narrow board should be limited, and in modern furniture production, the general solid wood narrow board does not exceed 60mm. In addition to limiting the width of the solid wood narrow board, the tree species in the same panel parts should be the same or similar in material properties, and the moisture content deviation of the adjacent solid wood narrow board should not be greater than 1%. There are various structural forms of solid wood panels, so the appropriate form of panels should be selected according to different uses in actual production.
1. Flattening.
The joint surface of the solid wood narrow board is planed straight and directly glued with adhesive. >>>More
For long-term reasons, a bed can't be done without a bed box, so why not buy one. A good bed is good for the health of the family, like Quanyou, Dynasty, and the Pearl in the palm are very good, and the price is not expensive when you do activities. I hope it can help you, please adopt it!
The method is to find the material per unit of product by the actual cost of wood consumed per unit of product (calculated according to the quantity consumed per unit of product), plus the cost of other materials consumed, and then the total material cost according to the quantity of product.
I think teak is the best, its color is relatively uniform throughout, the texture is not messy, the shrinkage coefficient is negligible, and it is not easy to deform for a long time Teak is rare, but it does have a lot of advantages, even if you put it in the sun and rain, it is not easy to warp or crack, and it is also fire-resistant, and it should not attract termites. >>>More
This kind of problem is widespread.
Many of my customers are the same confusion as you, the paint of solid wood furniture means that the general 2-4 months can be released, more than 4 months of paint odor removal is also very simple, 5-7 days can be done, as for the formaldehyde you mentioned exceeded, you can check the research report on the release of pine wood will understand. The formaldehyde release of pine wood is different from the formaldehyde release of wood-based panels, and most of the formaldehyde sources of wood-based panels are added from the production process of the board, which is total, and it can be done if the method is correct to solve it at one time without rebounding, but the formaldehyde of pine wood comes from its own generation, which is very troublesome to deal with. >>>More