How to pick a good toilet?

1.Gently touch the surface of the toilet bowl with your hands, if there is no uneven feeling, and feel that the glaze and the feel of the body are very delicate, which indicates that the quality of the toilet bowl is relatively good. If it's low-to-medium grade.

The glaze and blank surface of the toilet bowl will be rough and dull, and small holes will be found under the illumination of the light.

2.Because of the high temperature of the high-end toilet during firing, it meets the requirements of all-porcelain, so it will feel heavy in the hand. The firing temperature of the low-end toilet is low, and the time is short.

to not meet the requirements of all-porcelain.

3.Toilets fired at high temperatures have a low water absorption rate, so they are not easy to absorb sewage and produce odors. And some low-end toilets have a high water absorption rate, and when they suck in sewage, they are easy to emit unpleasant odors, and.

It is difficult to clean. Over time, cracks and water leaks will occur. When choosing, you can gently tap the toilet bowl with your hands, if the knocking sound is hoarse, not crisp and loud, then like this.

There is a high chance that the toilet bowl will have an internal crack or that the product is not cooked.

4.When choosing, you should also reach into the dirt of the toilet with your hand and touch whether the inside is smooth. If it feels rough to the touch, it means that there is no glaze inside, and such a toilet is prone to water leakage. And sitting.

The sealing gasket of the toilet should be made of rubber or foamed plastic, which has strong elasticity and good sealing performance.

5.Whether the design of the pipe is scientific and reasonable has a great impact on the flushing effect of the toilet. In general, you should test flushing the toilet before buying it. In the normal standard, in the case of less than or equal to six liters of water.

The toilet bowl should be able to flush out at least five water-filled ping-pong balls on average.

The only bathroom teaches you five details to buy a toilet.

Detail. First, the size of the deformation.

Place the toilet on a flat platform, move in all directions to check whether it is smooth and symmetrical, whether the surface edge of the installation surface and porcelain is flat, and whether the installation hole is uniform and smooth.

Detail. Second, whether there is cracking.

Gently tap the edge of the porcelain with a thin stick to see if it sounds crisp, if it is hoarse, it may crack.

Detail. Third, the quality of the glaze.

The glaze must be delicate and smooth, and the glaze color must be uniform and consistent. Drop a few drops of colored liquid on the glaze, and wipe dry with a damp cloth after a few seconds, and it is better if there are no dirty spots on the glaze.

Detail. Fourth, pay attention to appearance.

Split toilets are generally small in size and suitable for bathrooms with small space; The one-piece toilet has smooth lines and novel design, and there are many styles to choose from, and the return bend at the bottom of the toilet is closed, which provides convenience for future toilet cleaning; In addition, it is important to observe the height of the toilet tank, the higher the water tank, the greater the impulse, and the better the flushing effect.

Detail. 5. After-sales service.

In general, sanitary ware sellers in the market have relatively reliable and complete after-sales service. The purchaser can enjoy free installation, 1-3 warranty service, and the manufacturer is responsible for free maintenance and replacement. Even after the warranty period, only the cost of the replacement is charged.

However, some small-scale sellers, although they promise a warranty, cannot provide after-sales service by phone. Therefore, the warranty and installation services should be carefully implemented when purchasing, so as to avoid inconvenience and disputes in the future.

The first depends on the origin of the toilet, the porcelain of Chao'an, Guangdong is better, and the second is to see whether the porcelain is shiny and flawless.

The third is to look at the flushing method of the toilet, and it is better to choose the siphon method.

You touch the side of the water with your hands, and it's smooth and it's fine.