-
Anonymous users2024-01-24What kind of bathroom is it? I didn't make it clear that the sunken bathroom is easy to do, don't fill it up when backfilling, change it to the water first.
Only then does the backfill begin.
If you don't want to change the sewerage, then you have to go downstairs from the new water pipe, and if it's buried, then you don't have to change it.
Only to raise the ground.
It seems that two bathrooms use a main pipeline, the main pipe crossing is in the upper right corner, sunken, the public toilet is installed squatting, yes, the main horizontal pipe diameter PVC is installed on the right side of the 110 caliber, the horizontal pipe reaches the middle squatting place using the TY type tee tee port to make the inspection port leads to the ground, make a lid seal while dredging the use, link the use of the basin tee using TV reducing tee can be pre-embedded in the wall position, the squatting toilet is best to use its own anti-water bend, The ground height is not too high
There is no flue in the bathroom. Only sewage pipes. Ventilation ducts. Solar threaded pipe.
Although the top of the water pipe will increase the cost of early installation, it can facilitate later maintenance and reduce troubles. If the water pipe leaks on the ground, it is not easy to find, and the second is troublesome to maintain, and it is necessary to move the bathtub, basin, tile or something to repair, and it is possible to break the ground waterproof layer empty cover. >>>More
Bathrooms and kitchens generally do not have strong wires on the ground, but should be routed along the walls on the roof. Considering that the functionality of the kitchen and bathroom is relatively strong, the ground waterproofing is very strict, and the floor slotted wiring will affect the waterproof use function of the whole room. >>>More
Welcome to inquire about the worry-free consultants, water and electricity are separated, which is inevitable.