-
Anonymous users2024-01-24When decorating the bathroom, the partition is one of the most important considerations, the sanitary partition can effectively use the space, and the chic and ingenious partition can also play a role in improving the appearance. When designing and arranging partitions, it is necessary to determine the size of the partition according to different home decoration situations and different user groups, so as to achieve the greatest optimization. What materials should be used for the decoration of sanitary partitions, and the design of the bathroom is basically convenient, safe, easy to clean and beautiful.
Because there is often moisture in the room, the interior decoration materials must be waterproof and moisture-proof materials.
1. Lay floor tiles and wall tiles first, and then customize the sanitary partition according to the actual size (note that there may be errors up and down the wall, and the glass door can be customized according to the actual size to install and use.)
2. Before laying floor tiles, install sewer pipes and install floor drains (otherwise where will the shower water flow.)
3. There is a door frame to block water, if there is no door frame, a threshold stone (centimeters above the ground) should be specially installed, otherwise the shower water will not be able to achieve the purpose of dry and wet partitioning from under the door.
4. With floor drains, water flows into the sewer, where does water come from? The sill stone can be 8-12 cm wide, and the foot will not clump when stepping on it.
5. Don't use the slide, because the water and dust in the slide are difficult to clean, and it will stink after a long time.
We also have to understand according to our construction, but such a size also depends on the construction situation on site. So we also have to think about the back aspect. The higher partition door is about 2m, and the partition floor of the bathroom should be made of waterproof, dirt-resistant, non-slip granite, etc., and its height size should be 10-20mm lower than that of other grounds. >>>More
If it is a partition wall, it is necessary to make the wall first, and then the ceiling. If it is a movable partition (push-pull partition, glass partition, plastic steel partition, etc.), you can make a ceiling first, and then a partition.
It can be built with red bricks, painted with cement mortar, and then pasted with tiles.
Sliding doors (sky rail + ground rail + sliding door).
Partition curtain (hanging rail + curtain). >>>More
Step 1: Install the fixing plate.
Find a suitable position on the wall to draw the center line of the fixing piece, see how many screw holes are fixed on the fixing plate, and then punch a few holes on the center line of the wall, put the plastic race sleeve into the hole, and then use the expansion wire to fix the fixing plate on the wall. >>>More