How to connect a few wires of the dimmer switch in the living room

There is a multi-channel controlled optical converter, and this optical converter has a very intuitive wiring diagram, which is wired according to the wiring diagram. There are 2 4 lamps for general lighting, and the basic methods are single tube, double tube, and full open three control modes; The chandelier versions are divided into main lights, peripheral lights and fully open modes. rights.

If you are not a professional electrician, it is best not to operate at will, as a short circuit will occur due to the failure of the parallel wire.

There is a multi-channel control of the converter, and there is a very intuitive wiring diagram on the converter, and the wiring can be done according to the diagram.

There are generally two to four lamps in ordinary lamp panel lighting, which are basically three control modes, which are divided into single tube, double tube and full open; The chandelier and the like are divided into main lights, periphery and full open modes.

If you are not a professional electrician, it is best not to operate at will, if it is caused by a short circuit due to merging, it will be troublesome.

Let's look at the description of the lamp. The blue line is the zero line, the yellow-green line is the ground line, and the yellow line is the fire line.

Which kind of switch, at least send a picture to show you so that I can tell you!

Summary. Hello, dear you asked how to connect a few wires of the dimmer switch in the living room.

Here's the answer for you:

There is a multi-channel controlled optical converter, and this optical converter has a very intuitive wiring diagram, wiring according to the wiring diagram. There are 2 4 lamps for general lighting, and the basic methods are single tube, double tube, and full open three control modes; The chandelier versions are divided into main lights, peripheral lights and fully open modes. rights.

If you are not a professional electrician, it is best not to operate at will, as a short circuit will occur due to the failure of the parallel wire.

Extended Information: The time-delay light switch consists of several wires

Each dual-control switch has three wires, two of which are connected to the live wire and the neutral wire respectively, and the remaining two are contact wires, and the contact wire is connected to the two static contacts of the switch.

PE does not enter the switch, only the lamp shell can be connected, or it can be.

Fourth, the third is a live wire into the line, a live wire into the line, a live wire into the line, this is a three-wire system, some manufacturers will call two wires, four things more than a zero line.

How to connect a few wires of the dimmer switch in the living room

Hello, how to connect the number of wires of the dimmer switch in the living room to provide you with the answer: there is a multi-channel control of the optical converter, this optical converter has a very intuitive wiring diagram, according to the wiring diagram. There are 2 4 lamps for general lighting, and the basic methods are single tube, double tube, and full open three control modes; The chandelier versions are divided into main lights, peripheral lights and fully open modes.

Each dual-control switch has three wires, two of which are connected to the live wire and the neutral wire respectively, and the remaining two are contact wires, and the contact wire is connected to the two static contacts of the switch. PE does not enter the switch, and the first person in the shed can only connect the lamp shell, or so.

Fourth, the third is a live wire into the line, a live wire into the line, a live wire into the line, this is a three-wire system, some manufacturers will call two wires, four things more than a zero line.

Hopefully, the answers provided will help you <>