What is the general indicator of tool wear in panel furniture production?

This is not a trick, because the main material of panel furniture is particleboard, and there are everything in the particleboard, and the iron nails and stones are messy.

1. Cut down fresh logs; 2. Peel off the bark and remove the core of the pith; 3. Fiber crushing into high temperature disinfection and sterilization, and drying to 25% moisture content; 5. Add environmentally friendly resin glue catalyst (containing formaldehyde); 6. Paving tons of high pressure 200 degrees high temperature pat; 8. Plate windmill cooling; 9. Double-sided killing; 10. Plate anti-deformation and health preservation. The production process of layout furniture is: 1. Computer cutting; 2. Mechanical edge banding; 3. High-speed row drilling; 4. Mechanical forming; 5. Quality inspection; 6. Mechanical sanding; 7. Fill putty; 8. sealing and fixing the bottom; 9. Hand sanding; 10. Quality inspection again; 11. spraying primer; 12. Repeated grinding; 13. spraying topcoat; 14. Dust-free drying; 15. Quality inspection again; 16. a three-layer package; The whole process is scientific, rigorous and fully in line with international standards.

Cutting boards, (milling) edge banding, guide holes, slotting, trial assembly.

Consider making an all-aluminum alloy wardrobe, the production equipment only needs a simple cutting machine, not so much equipment as expensive as plate furniture, and the all-aluminum alloy wardrobe is environmentally friendly and formaldehyde-free, with a high degree of market acceptance, you can contact Foshan Aluminum.

In the early stage, it is to conduct market research, select paper color, metal fittings, etc., and then develop new products, design the appearance of furniture, and evaluate, pass the evaluation of the product to send the sample group for proofing, and carry out structural design after proofing, draw furniture structure division diagram, large sample drawing, audit, after passing, to the production workshop for small batch trial production, and proofread the drawings. >>>More