-
Anonymous users2024-01-24It looks like your heating is due to the lack of hot water circulating flow in the tail end. Reasons for insufficient flow: 1. Single cycle; 2. The pressure of the floor height is small; 3. The pipeline is thin; 4. There is a blockage (not completely blocked).
You can check for yourself if it is blocked: close the water return valve and drain the heater completely. Open the joints at both ends of each radiator to check the water inlet at the end of the radiator, dredge it if it is blocked, and check whether the pipe is blocked if it is not blocked.
If the pipe is blocked, it needs to be replaced.
-
Anonymous users2024-01-23Solution: First of all, check whether the horizontal position of the return pipe and the water inlet pipe is smooth, then does your living room have floor heating? If there is, then check if there is a place to gamble, the return is not smooth, if you are fine, you add a single cycle of the dragon, you have this kind of problem is very common, add a dragon, it will cost about 500 yuan, and the effect is very good.
-
Anonymous users2024-01-22The pipeline circulation is not good, install a circulation pump in the bathroom! Buy a Wilo on the market, super quiet.
There is a way to deal with this situation, which is caused by the fact that the points are not evenly adjusted, 0 one, you can turn off the heating elsewhere a little. Second, you can also turn on the heating in the living room a little more, so that it will not be cold. You can try it. One.
Is it a form of separate heating? If not, it is connected to the upper and lower neighbors, this circuit has high resistance (the resistance is not necessarily in your house), the flow of this circuit is small, because the water is first to the 5th floor, 4th floor, 3rd floor and then to the 2nd floor, the water temperature is gradually dropping. And after reaching the second floor, the water is basically cold. >>>More
It can be improved so much that if you install a circulating pump in the water supply main, all the pipes in your house will be hot.
There are many reasons why the radiator is not hot, such as your installation location, the size of the radiator, the water problem of the boiler, whether the radiator pipeline is blocked, the water pressure problem, whether the pipeline is relatively small, resulting in a small water flow, etc., it is recommended that you find an installation company to see, the system is made by them, it should be able to be solved.
Plumbing? If the heating is not hot as a whole, it may be that the water is entering or the return valve is not open. If the heating in a single room is not hot, it may be caused by the radiator's nest and not deflated before use. >>>More