-
Anonymous users2024-01-24Use a flat presser foot to pad the presser foot up, high in the front and low in the back. The seam machine is to replace the needle board with a thin edge or grind it a little finer.
Let me keep it simple. If you want to adjust the furniture and the door is still using a dark hinge, then there is an adjusting screw on the hinge arm (the one near the hinge cup), this is to adjust the "left and right" margin, adjust the amount of door panel coverage. If alignment is required in the height direction, the base of the hinge can be adjusted. >>>More
It is recommended that the color essence be added to the topcoat, so that the color is more uniform after coloring, and it can also be added to the primer, which will increase the difficulty of construction when the primer is polished, and the color will be knocked off if the paint film is worn through. Later color correction is very troublesome.
The air pressure does not need to be too much, just adjust the sector to open.
I have been doing paint for 30 years, and I need to teach the art of mixing paint with materials on the spot, which is not clear in a few words.
1. First of all, we must prepare two kinds of pigments, black and red, and the color quality should be authentic, both of which are RGB 100%. >>>More