How to remove the label on the security door

1. Use a hair dryer to blow on the small advertisement, blow it all around, and it must be blown very evenly, and then there will be a roll up, take a corner and slowly tear it out, while tearing and blowing, slowly it will follow.

2. Use a sprayer to wet and soak the label, and scrape off the sticker with a small spatula.

3. Apply the wind oil essence to the label, wait for about 10 minutes, the wind oil essence will soak the label, and then tear it off. If there is any residual glue, apply a little wind oil essence and wipe it with paper, and it will become very smooth.

4. When washing clothes at home, by the way, use a rag to apply soapy water to the label, and then apply it again after a while, and then wipe it with a towel after washing the clothes, and the label on the door will be removed.

I don't know what you're talking about.

Generally, there are three kinds of so-called labels, one is the steel seal type, which is completely embedded in the door, this does not need to be thought about, and it cannot be removed;

One is sticker-type, this one can be removed after a while if you moisten it with some water;

There is also an iron seal type, pasted on the door, this want to remove is very complicated, first to determine whether it is glued on, or welded, you can use a towel to glue on the warm water, and then cover it, if you are confident in the stability of your hand, you can also light a candle, about 10 cm away from the label to burn for a while, about 3 minutes, the towel to about 5 minutes, and then shake it with your hand left and right, if it can move, it is glued, then it is easy, burn with a candle for about 5 minutes, cover it with a hot towel for 10 minutes and you can take it off; If you can't move, it's welded, then you don't want to remove it, if it is hard, it will only affect the appearance and cause damage to the door.

Apply the wind oil essence to it, wait 2 minutes, and the label is easily removed.

Blow hot with a hair dryer, wipe it with water and it will fall.

Pine perfume or any thinner left over from your home renovation will do.