-
Anonymous users2024-01-24Make an S-shaped ceiling or irregular ceiling based on the beam, and add tinted glass to the inner soil line lamp. The edges of the focus should not be too thick. Plainly.
It is to make a decorative lampstand with a beam. The lamp doesn't have to be in the center. It doesn't matter if it's a little bit.
It is possible to combine decorative lights and main lights into one. Make a circular or semicircular or large semicircular protrusion from the side of the beam to install the main light. The other side of the beam is made irregular, and the edge is curved to the point where it is connected to the roof.
Then, decorate a few small colored lights at random.
OK. Just consider whether there is a door on the load-bearing beam. No door is perfectly fine.
1. It generally doesn't matter if all bathrooms have beams, because the bathroom basically has to be made of suspended ceilings, such as PVC gusset plates, integrated aluminum gusset plates, and gypsum board ceilings, which can cover the beams.
I can't understand what the error between the load-bearing beam and the lintel means when Mi said. Whatever that means, an axis error of more than one centimeter is not normal.
It's normal for a house to have pillars, just like people have bones. Liang is the same thing. Some people's beams will have an impact, and some people's homes have no impact, and if there are beams, it is not normal. It may not necessarily have an impact, it depends on the specific situation!
All beams are load-bearing beams, and they should be punched in the beam as much as possible when punching, so as not to hit the main steel bar, and the diameter of the hole should not be too large; The walls are divided into load-bearing and non-load-bearing walls, with the dark walls on Figure 2 being load-bearing walls and the light-colored walls being non-load-bearing walls.