-
Anonymous users2024-01-24Commonly used plate thickness 12mm, 15mm, 18mm three total specifications.
-
Anonymous users2024-01-23Generally, it is 3 cm or 4 cm, depending on what board is used, and the thickness of the board is different.
-
Anonymous users2024-01-22I don't know what you're asking about, but is it the thickness of the panels used for panel furniture? Generally 18mm
-
Anonymous users2024-01-21The base material of panel furniture is generally 18 mm or 28 mm. There will also be a special thickness, but the above two are the main ones.
-
Anonymous users2024-01-20The commonly used cabinet body plate is 18mm thick, the back panel is 9mm thick, and there are 5mm thick, 5mm is generally used in the kitchen, but it also depends on the brand, and some brand cabinet backs are not as thick as 5mm. The countertop of the desk is 22mm thick and 25mm thick, and the specific depends on each brand, these are several specifications that I know, of course, there are other specifications, I won't list them, I hope it can help you!
Jin Liheng furniture is very good, you can call to consult.
Advantages of panel furniture:
The first is the effective use of trees, the main raw material of panel furniture is wood-based panels, mainly wood residues, artificial fast-growing and high-yield forests as raw materials. >>>More
The materials are different, and the panel furniture made by woodworking is basically made of large core boards, also called woodworking boards, with good nail grip. Custom-made panel furniture is generally melamine board, particle board and so on. In terms of production technology, the manpower and material resources of carpentry are limited, so the surface feels slightly worse. >>>More
The edge banding of panel furniture is not important, pay attention to the advantages and disadvantages of edge banding materials, pay attention to the phenomenon of edge banding is not smooth, and pay special attention to the phenomenon of edge banding on all six sides - although the formaldehyde adhesive is used to make the board production process or less volatile gas edge banding, the environmental protection of the living room depends on the firmness of the furniture structure, the gap between the cracks of the furniture door and the drawer shows that the workmanship is rough and deformed; Second, the single box double box through the outer surface of the outer furniture should be laminated with the board, called double box, double box furniture, both beautiful and strong, hardware use at will, the advantages of the combination of panel furniture, the quality of the connecting parts is bad, the quality of the whole furniture is closely related, imported furniture is expensive, some details, particleboard and MDFLook at the density of the material used in the hinge groove and the particleboard in the hole, carefully observe the bare internal structure of the hinge groove and the hole, and see the density of the particleboard.
Strong Green Island Love Good Home Fuhaida Dongsheng Richang Pengchengda Xinwang Oriental Dream Beauty Strong Mighty Hongfa . And also. >>>More