What s the matter if the water heater can t be turned on? The water in the kitchen was huge and the

Glad to answer for you:

The switch that controls the heating wire is short-circuited, or the circuit board is faulty and the heating continues, and the temperature cannot be detected, and finally the water is boiled, and the pressure rises rapidly, resulting in a burst pipe. >>>More

The socket of the water heater is burned out, mainly because the current that the socket can withstand is too small. For example, if the socket is 5A and the current of the water heater is 10A, then the socket is easy to burn out. >>>More

In two cases, one is that the indoor pipeline is too long, the dark hail pipe is not insulated, the water temperature near the source tank in the toilet is high, and the water temperature in the kitchen is low, which is caused by heat dissipation. The second reason is that there is no backwater in the kitchen hot water pipeline, and there is cold water for a period of time when it is first opened.

Multiple reasons. No gas.

Low water pressure. To change the battery. Wait a minute. >>>More

Do not rule out the possibility of water pressure (can be verified in two places without the output of the water heater, whether the water pressure in the two places is consistent), but the distance between the bathroom and the kitchen is not likely to cause water pressure problems (the two are very close), more attention should be paid to the indoor problems of the bathroom, if the bathroom is not ventilated (there is an exhaust outlet and there is no exhaust fan or there is an exhaust fan and the bathroom is too tight to get air), the oxygen supply is insufficient, carbon monoxide reflux and gas combustion is not comprehensive, not only affect the combustion heating, It can also lead to poisoning with water heaters.