-
Anonymous users2024-01-24Find a new pipe to connect to the machine You can choose the floor drain You can look at the Jindel floor drain This kind of floor drain is a large water seal anti-odor floor drain, the water seal height reaches the national requirements of 5cm, and the water seal storage capacity exceeds 300ml, which can ensure that it does not dry up for 30 days, and there is no one at home for a long time in time, and there is no need to worry about the overflow of odorous germs, and the water seal of other products on the market is located in the drainage pipe, the volume is too small, and it is easy to dry up, resulting in the failure of the water seal, and it cannot play the role of actual anti-odor, anti-virus and anti-bacterial insects. At the same time, it also has a siphon function, and the water is faster than the general floor drain.
-
Anonymous users2024-01-23Find a professional worker to deal with it, and get it for 200 yuan.
-
Anonymous users2024-01-22fast-drying cement;
Epoxy resin (AB glue);
Balcony water pipe leakage is a relatively common problem in life, and if it is not handled well, the relationship between neighbors will be bad, so it must be dealt with well. 1 The amount of water leakage after the water pipe bursts is generally directly related to the water pressure in the pipe. Whether the water is dripping or gushing out, the most important thing to do at this point is to close the valve of the water main immediately and report it to the local property department. >>>More
Disassemble or replace the leaking pipe, and connect it directly after applying it with PVC special glue, and using raw material tape and black tape can not prevent water leakage. If the leakage is not very serious, it is okay to apply glass glue on the outside of the pipe or in the leaky area, but the premise is that when applying glass glue, the tube must be dry and kept for at least 12 hours.
Start by identifying where the water is leaking. If it is only a joint leakage, under the premise that the quality of the pipe is qualified, the joint can be replaced or a leak-proof sealing tape and AB sealant can be added to the joint; If the quality of the pipe is not good, the pipe should be replaced. You can also apply the adjusted AB glue in the leaking place, and then wrap a layer of ribbon on it, so that the ribbon is soaked with AB glue and then apply a layer of AB glue on the ribbon, and the whole process can be divided into two or many times.
It is definitely not possible to wipe with glue, like this I generally can reconnect if I can reconnect, and if I can't reconnect it, I will drop the section of pipe in front of the leakage, and carefully shave out the pipe in the pipe fittings with a razor, and reconnect it with a live joint. It should be noted that you must be careful when shaving off the 110 old pipe in the pipe fitting, otherwise it will be more troublesome if the pipe fitting is damaged.
Clean the surroundings, dry them with a hair dryer, and seal them with structural adhesive.