When the toilet light is connected to the switch, it will turn off the branch gate

Updated on Toilets 2024-06-30
4 answers
  1. Anonymous users2024-01-24

    I don't know if your switch is single, or combined If combined, this may be the wrong switch wire, open and check If it is normal, disconnect the power cord connected to the chandelier, send the power to see if it jumps, if it does not jump, it is a chandelier problem If it jumps, carefully check these two sets of wires with a multimeter to see if the light line is short-circuited during installation

    If you come from the bath bomb and the wire, this can only be no way and connect to the power line of the bath bomb, do not connect to the switch wire

  2. Anonymous users2024-01-23

    This is obvious, generally toilets, bathrooms, etc. are relatively humid! Of course, moisture may cause leakage, so it will cause tripping.

  3. Anonymous users2024-01-22

    It is a very simple line, that is, the level of the decoration master, it seems impossible to connect the wrong line, you check whether the lamp head is short circuited.

  4. Anonymous users2024-01-21

    You must have connected the wrong set of wires into the lamp, check it carefully! The line is definitely no problem! It's possible that you have both the L and N wires connected to the switch.

Related questions
The air switch in the living room at home will trip as soon as it is closed, and the room, bathroom,
5 answers2024-06-30

1.There may be short circuits in living room wiring, electrical appliances, wiring boards, etc. >>>More

The bathroom socket switch jumps as soon as the main switch is closed
2 answers2024-06-30

Did you get water in the bath, find an electrician to fix it?

As soon as the light in the toilet is turned on, the leakage switch will trip, and it will be the sa
6 answers2024-06-30

You take the light off and put it somewhere else to try it to see if there is a problem, if it is not, it must be a problem with the electrical wiring in your toilet. Carefully check whether the insulating rubber of the line and cable is damaged, and another point is to check the leakage switch, and the aging of some leakage switch components will also cause this reason!! Hope to help you with your questions

The lights in my bathroom flash and flicker when you turn them on, sometimes they don't turn on at a
3 answers2024-06-30

The switch is broken, or the first wire is not in good contact. I don't know how to repair it, I live a single door, and the general electrician will not come to repair it. Whoever installs it for you can find him free or paid warranty, and he has this obligation.

My living room light is segmented, but the switch is one control, you can change the switch, there a
4 answers2024-06-30

You can change it, let the maintenance master get it, it will cost some money. You call 12580 to find out who repairs this in your neighborhood, or look at the newspapers that have it, and this has happened in my family before. Hope to adopt