How to make the bedside upholstered background wall in the bedroom

Nowadays, many families like to add a soft background wall to the head of the bed in their bedroom, so that not only does not need the head of the bed, but also makes the whole bedroom look soft and comfortable. Generally, the main steps of the upholstered background wall at the head of the bed are as follows: Step 1:

laying planks; First of all, a layer of wooden bottom board should be laid to facilitate the fixation of the upholstery strip on it. Step 2: Tailor the profile; Nail the strip according to the wall line, and cut out the gap on the fixed surface of the strip at the intersection position to avoid overlapping at the intersection.

When encountering a curve, cut the fixed surface of the strip into a zigzag shape and bend the nail. Step 3: Spread the sponge; Size filler sponge for mounting strips.

Cut the fabric of the upholstered bedside background into the specifications of the upholstery unit, slightly enlarge the edge according to the thickness of the sponge, and insert the fabric into the gap of the strip with a knife. Do not insert it to the end when inserting, and adjust it while inserting it after the four sides of the fabric are set. If the fabric is the same plain fabric, you don't need to cut the fabric, fill in the middle part of the gap first, and then extend it around.

Step 4: Insert the fabric; Insert the fabric into the profile. When it is close to the wooden mold or adjacent wall, it can be directly inserted into the adjacent gap, and the gap can be slightly glued before inserting the fabric.

If there is no adjacent object to put the fabric into the gap between the strip and the wall, if the fabric is thin, cut out a long strip of fabric and paste it to thicken, and then cover the edge fabric on top and insert the gap between the strip and the wall, so that the side will look flat and beautiful.

Hello, the practice of bedroom soft packaging: Step 1: Pay-off on the wall paved with a base plate according to the design requirements Pay-off to draw the pattern Step 2:

Nail the strip according to the wall line and nail, when encountering a cross, cut out a gap in the fixed surface of the strip at the intersection position to avoid overlapping at the intersection. When encountering a curve, cut the fixed surface of the strip into a zigzag shape and bend the nail.