The glazed floor tiles in the bathroom are glazed and hollow, and the ice can be clearly seen betwee

Updated on Bathroom 2024-06-21
1 answers
  1. Anonymous users2024-01-24

    1 All are possible.

    Check the joint head at the connection to the device first.

    Generally speaking, the PPR pipe in the wall is unlikely to burst!

Related questions
What should I do if the floor tiles bulge after the bathroom leaks and grouting
2 answers2024-06-21

You can remove the floor, and then re-waterproof the floor, and then put the floor on again, so that there will be no bulge.

How to shovel the bathroom floor tiles yourself, it is very expensive to find workers
2 answers2024-06-21

You can go to the power tool to rent an electric pickaxe to break the floor tiles for a day and clean them, or use a hammer and chisel to knock down the corners little by little.

How to clean the floor tiles in the bathroom
4 answers2024-06-21

If it is not easy to wash, you can wash it with dilute sulfuric acid, but pay attention to safety!

The toilet pit rises above the floor tiles
2 answers2024-06-21

If the pedal of the squatting toilet is wide, it is inconvenient to step on it, and there is a floor drain drainage, it can not be changed. If it is narrow, it needs to be tiled and widened, and if it must be drained from here, the entire ground is raised by bricks and sloped to the pit.

Bathroom floor tiles are bubbling up
1 answers2024-06-21

You are using a seated toilet, it may be that the wax ring underneath needs to be replaced. The toilet bowl is not firmly fastened, and there is a shaky loose position. If there are no problems, check the connections of other sewer pipes. When there is water and air, it will bubble.