When decorating the home, the worker made a hole in the wall of the toilet pipe, how should it be ha

Summary. Drain the water in the toilet tank and clean the stains from the hole with a rag. If the hole is relatively small, you can use glass glue to plug it, first cover the hole with a cut piece of paper, and punch holes in the paper to expose the broken parts.

Then mix the glass glue with the repair agent, stir well, apply it to the hole, remove the piece of paper, and wipe the excess glue around. After the glass glue is played, it cannot be used immediately, and it can only be used normally after the surface is dry.

When decorating the home, the worker made a hole in the wall of the toilet pipe, how should it be handled?

Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

Drain the water in the toilet tank and clean the stains from the hole with a rag. If the hole is relatively small, you can use glass glue to block it, first cover the hole with a cut piece of paper, and punch holes in the paper to expose the broken parts. Then mix the glass glue with the repair agent, stir well, apply it to the hole, then remove the piece of paper, and wipe the excess glue around it clean.

After the glass glue is played, it cannot be used immediately, and it can only be used normally after the surface is dry.

If the surface of the toilet is seriously damaged, then there is no need to repair it, and it is better to replace a toilet directly.

When installing the toilet, what should I do if the master makes a 5 hole in the pit pipe.

The above methods are for you.

Use the bundle joint of the same diameter and coat the inner wall of the bundle with PVC glue. Put on the knots and you're all set. I hope my answer can help you.

It's good to plug it with glue, it's no problem to get into the water.

It must be sealed, or it will smell later.