-
Anonymous users2024-01-24My house is the same, leaning against the wall outside the bathroom is falling off very badly, but I haven't had time to repair it yet. If you have done waterproofing or there is no effect, it means that the wall is still wet, at this time you should shovel off all this piece, and then do waterproofing, scrape putty, brush primer, and finally brush latex paint, because the outside of my bathroom is the living room, so the wall is decorated with latex paint. I decided to brush a layer of morning light primer immediately, because the top coat is made of morning light latex paint, and the primer and top coat should be matched.
-
Anonymous users2024-01-23It is very likely that the choice of waterproof coating is wrong, and waterproof coating is divided into organic and inorganic; Flexible, rigid; Coatings, membranes, etc., family bathroom waterproofing can use polymer cement-based waterproof coatings.
It means that the waterproofing of the bathroom is not done well, and the water seeps into the outside and resurgence.
In my judgment, the bathroom floor is seeping water. If there are no accidents, you need to redo it.
This is the floor swelling caused by too much moisture in the bathroom, and it should be dismantled, re-paved with moisture-proof film, and reinstalled the wooden floor.
In this case, the main reason is that the range of the waterproof layer of the bathroom is not large enough, or the waterproof layer is not effective, there is water seepage or moisture spreads through the wall; It is recommended to increase the range of the waterproofing layer or increase the height of the waterproofing layer.
The waterproofing of the bathroom is not done well, or the water pipe buried in the wall is leaking, which will cause the outside wall to return to moisture and peel. >>>More