The tiles in my living room were not cleaned in time after the renovation, and now there is some cem

Soak it in water and then shovel, and if there is paint or anything else, soak it in water and shovel it.

Vitrified bricks, under the blister, shovel slowly, sandpaper lightly, do not hurt the bricks.

1.Prepare a pair of old jeans, tear them into pieces to make a rag, and then wipe the rag with some '84' liquid on the residual cement. The premise is that the residual cement must be less and thin.

2.If the tiles are of good quality, then don't worry at all, wait for the cement to dry naturally and wipe it clean with jeans.

3.If the cement is too thick, shovel it with a wooden tool, provided that the cement dries thoroughly.

4.Remind; Don't use metal objects such as steel wool balls, putty knives, etc., they will never be removed after leaving traces.

This one is very easy to clean, you can buy Shield King Descaler King Cleaner online.

The cleaning agent does not work, you can scrape it off with a small wooden board, do not use iron, because iron will scratch the magnetic surface, and the hardness of the wooden board is lower than the magnetic surface, so it is safer.

Use the toilet to clean, remove the stain powder, and preferably the stains on the oxalic acid floor tiles.

If you want cement, you don't need a detergent, just wet it with water and shovel it with a scraper. However, it is better not to use tools with uneven edges, which are easy to scratch the floor tiles, which is not cost-effective.

You don't need to clean it, just take some soft wood and cough it gently, and it will come down, don't want to say that it will be hung down with iron, which will damage the wall.

Recently, the No. 12 house was handed over, let's talk about the decoration matters, let me also pay attention to it, what needs to be done to hand over the house?

Directly find a piece of harder square wood and knock it off.