The faucet of the balcony and the fully automatic washing machine does not come out, and you need to

1. The water pressure does not meet the requirements, and the pressure is too small.

2. The installation of water pipelines is not standardized, and the pipelines are too long.

3. Because of the above reasons, there is air in the pipeline, and the water pressure cannot go in, so there will be water after opening the other faucet to exhaust.

4. Solution: Install a faucet on the side of the faucet of the washing machine, which is used to open and deflect when washing and discharging water, so that there is water for laundry.

He turned off the hot water, so as soon as the other hot and cold water faucet was turned on, there was water in the washing machine faucet.

The faucet of the landlord's house is double insurance with insurance.

You said that there are two possibilities for water leakage: First, the washing machine faucet and the wall inner wire are not tightly connected, it may be that there is a problem with the faucet or inner wire, or the raw material belt is not used. Second, the washing machine faucet and the washing machine inlet pipe are not connected properly.

There are four reasons why the pipe of the automatic washing machine does not have water: First, the water flow of the faucet is too low or the water pressure is not enough; Solution: Change the time period and replace the faucet.

Second, the washing water level of the washing machine is not set; Solution: Set the water. Next to:

Thank you for the bounty.

My family is the same problem, turn on the washing machine faucet and there is no water, and then just open a faucet and the faucet of the washing machine will come out with the water, have you solved it.

It is very likely that this washing machine faucet is connected to the hot water pipe.