-
Anonymous users2024-01-24Soft waterproofing is generally used, and soft waterproofing can be more immersed in the base layer than hard waterproofing, and the waterproof effect is better.
-
Anonymous users2024-01-23Polyurethane waterproof coatings are used more, the key is that the closed water test can not seep water, and the waterproof protective layer must be made.
-
Anonymous users2024-01-22Personal opinion Soft waterproofing generally refers to the SPS waterproofing membrane that needs to be hot-melted and bonded during construction. Hard waterproofing generally refers to the direct application of waterproof coatings on the structural level, such as waterproofing. General new house kitchen'Weidu has a waterproof layer covered with a 2 3cm mortar protective layer when the owner closes the house'Weikai developers will store a certain depth of water for the owner Cong Mengdou to accept the acceptance.
If you use yellow sand clay to make bathroom backfill material or waterproof material and then use mortar to make a protective layer, hard waterproof can be known acres, cheap and the construction period is short and fast. If you do not consider making a protective layer on the waterproof layer and using construction waste as a backfill material, it is recommended that you use the soft waterproof construction process.
-
Anonymous users2024-01-211. All satisfactory answers: Xiaobao's wage earners level 12009-06-23Personal opinion Soft waterproofing generally refers to SPS waterproofing membrane construction, which needs to be hot-melted and bonded. Hard waterproofing generally refers to the direct application of waterproof coatings on the structural level, such as waterproofing. General new house kitchen'Weidu has a waterproof layer covered with a 2 3cm mortar protective layer when the owner closes the house'The developer of Weikai will store a certain depth of water for the owner to accept, indicating that it will not leak.
If you use yellow sand clay to make bathroom backfill material or waterproof material and then use mortar to make a protective layer, hard waterproof can be, cheap and the construction period is short and fast. If you do not consider making a protective layer on the waterproof layer and using construction waste as a backfill material, it is recommended that you use the soft waterproof construction process.
It is good to use waterproof coating, and the construction is convenient. As long as it is done in place, the waterproof effect is very good.
The main thing is to look at the waterproofness of the things you buy, choose waterproof coatings to see the quality, and do a 24-hour closed water test after waterproofing, which is the most important.
Waterproofing works refer to the waterproofing of walls and floors in kitchens, bathrooms, and balconies. Generally, it is suitable to use coated film waterproofing, such as polyurethane waterproof coating, pay attention to three models, and 851 is forbidden to be used in indoor waterproofing, all of which are waterproof after forming a film, and the general decoration company will use waterproofing agent, and the waterproof performance of waterproofing agent is poor. >>>More
The tarp is relatively better, with a certain tear resistance and overall waterproof performance. 1. The ground is leveled, not uneven, and flattened with a tool axe. Otherwise, the quality of the waterproof is not good and it is ugly! >>>More
Bathroom anti-decoration pipes, yin and yang angles, should be made of high plasticity, do not need lap waterproof materials, such as paint waterproof, convenient construction at the same time, will not leave leakage of weak parts, of course, polypropylene is cheap, but the waterproof effect is not good, so kitchen and bathroom waterproof recommended to choose coatings.