-
Anonymous users2024-01-24Waterproofing is a process that is completed before renovation.
There is no need to do it after the renovation. Besides. Your bricks are all paved. The cement was also done.
I want to measure water. I don't think you can measure it in 2 days.
-
Anonymous users2024-01-23The bathroom itself will be so much lower.
What else do you want to block?
Before the renovation, there will be a test of the water.
Without leakage, I perform a second waterproofing!
Do you still need to test the water for such a waterproof?
Personally, I don't think it's necessary. And for this project, the decoration company has a two-year warranty.
If it doesn't leak in two years, there's basically no possibility in the future.
If there is a water leak, the decoration company is fully responsible for this problem.
-
Anonymous users2024-01-22Put plenty of sand. The waterproofing test should be done before laying the floor tiles.
-
Anonymous users2024-01-21The height of the bathroom is generally much lower, so there is no need to block the door with sand.
As an ordinary people's process testing, they can only do a closed water experiment, and after brushing the waterproof and drying, put water inside, and go downstairs to see if there are any traces of water leakage. If you panic in your heart, you can only watch and brush it again.
Toilet waterproofing membrane or coating film waterproofing can be, the main construction operation should be meticulous, the general membrane construction is more difficult, and the coating film waterproof operation is simpler. Waterproofing requires not only good material quality, but also meticulous construction. SYR reactive adhesive polymer waterproof membrane or Shuyu brand JS waterproof coating construction is still relatively good.
Do a waterproof experiment! Fill the bathroom with 50 cm of water! After 1-2 days! Take a look downstairs for water leaks! If not, it proves that the waterproofing effect is good! Hope it helps.
Do waterproofing needs to be done on the surface of the water, dig excellent permeability crystalline waterproofing, you can do it yourself on the cement surface with a super permeable waterproof guard (if there are cracks and potholes on the cement surface, fill the complete with metin porcelain glue and then do waterproofing). >>>More
It is estimated that it is more difficult to measure, the tiles also absorb water, and the bathroom also has a floor drain, and there is a layer below to make it easy to get to the bottom of the place, so you can try to seal the floor drain and then store water to try. But it doesn't feel like it makes much sense.