How much does a kitchen sink install costKitchen sink installation steps

You can install it yourself, the key is glass glue, it's very simple.

View the original post

1. The location of the sink should be reserved.

Reserve a sink, and provide the approximate size of the sink when ordering the sink. It is best to have a sink floor plan to provide it to avoid rework due to inconsistencies. When installing a sink, the position of the countertop should be in line with the volume of the sink.

The sink should be installed firmly, and the tank body should not be swayed from side to side. The installation of the sink is not a big project in the whole decoration, but try to pay more attention to the tightness of the connection during the installation process.

2. Install the faucet and water inlet pipe first.

Before installing the sink, the faucet and water inlet pipe should be installed. In addition, one end of the inlet pipe on the faucet is connected to the water inlet switch.

3. Put the sink on the countertop.

After putting it into the countertop, you need to install the matching hanging piece between the trough and the countertop. The sink should be installed firmly, and the tank body should not be swayed from side to side. The installation of the sink is not a big project in the whole decoration, but try to pay more attention to the tightness of the connection during the installation process.

4. Seal the overflow hole and filter basket.

The sealing degree of the overflow hole and filter blue is to affect the use of the sink in the future, so the sealing degree of the overflow hole and filter blue is very important, and it is important to check the sealing of the overflow hole and filter basket after installation.

5. Install the supporting hanging piece.

The last step of installation is to install the matching hanging piece of the sink, generally after the sink is bought at home, the worker will cut the countertop of the cabinet according to the size of the sink, and after putting it into the countertop, it is necessary to install the matching hanging piece between the sink body and the countertop. When installing, it should avoid small voids causing the tank to shake to better prevent water leakage in the future.

6. Drainage test and edge banding.

After installation, a drainage test is carried out, the sink is filled with water, and the drainage of the drain and overflow hole is tested at the same time. If there is any water seepage when draining, it should be reworked immediately. After the drain test, to make sure that there are no problems, the edge of the sink can be banded.

When using silicone edge banding, it is necessary to ensure that the connection gap between the sink and the table top is uniform, and there can be no water seepage.

Kitchen sink is indispensable for every family to decorate, but some of its installation steps are still unclear to many people, here is to introduce, first of all, when designing cabinets, the sink should be reserved, and the approximate size of the sink needs to be provided when ordering the countertop, so as not to meet the rework and redo. The sink should be installed at the end of the kitchen renovation, and the water in the water pipe should be drained before installation.

First, install the sink faucet and the water inlet pipe, and the faucet should be installed firmly and the connection should not seep water; After placing the sink in the corresponding position in the countertop, the faucet inlet pipe, and the hot and cold water pipes can not be mistaken; The connection between the sewer pipe of the overflow hole and the filter basket and the tank body is firmly sealed; Install the matching hanging piece between the trough and the table to avoid the small gap causing the trough to shake; To do a drainage test, fill the sink with water, test the drainage of the filter basket and overflow hole, and find that the seepage should be reworked immediately; The edge sealing around the tank body is clamped and leveled with the matching hanging screws, and then the edge is sealed with silicone to ensure that the gap between the sink and the table top is uniform and there is no water seepage; Rinse the sink thoroughly after installation.

Therefore, it is very simple to buy something and look at it, in fact, there are some steps for it.