What s going on with the re damp peeling on both sides of the bathroom door?

There is a resurgence of moisture and peeling at the door of the bathroom, and today I will tell you the reason and solution.

Waterproofing is not done well, bathroom waterproofing must be done well, otherwise it is very troublesome, it is recommended that the bathroom, especially the bathroom with a shower, be fully waterproofed.

Answer 1, first of all, check whether there are pipes installed on both sides of the door or whether there is a floor drain, because the reason for the frequent return of moisture, it may be that the pipeline leaks or the floor drain has the problem of water seepage or backwater, and there will also be a phenomenon of reverse moisture.

2. If there is no problem with these, we will check whether the waterproof layer on both sides of the door is not done, and some masters are more negligent on both sides of the bathroom door when laying the waterproof layer of the bathroom, so it will lead to the problem of resurgence in the later stage.

3. There is another reason that it will also cause moisture on both sides of the bathroom door, where the angle valve is installed, and if the angle valve has water seepage, it will slowly penetrate along the tile, and after a long time, it will cause the wall to be damp on both sides of the door, and this takes a certain amount of time, so it is difficult for many people to find.

In this case, the waterproof layer in the bathroom is basically overflowing, and if this problem occurs when you just move, it is that the waterproof is not done well. If you have lived for more than half a year, it is too much water accumulation in the waterproof layer due to long-term water seepage, and you can redo the ground tile joints.