-
Yes, the floor tiles of the general bathroom are a little sloping, you can observe carefully, they are inclined in the direction of the drain, in order not to store water, the bathroom has to take a bath, etc., there is often water, so it should be designed like this!
-
2% slope, the lowest point is the floor drain.
-
There is a leveling slope to ensure smooth drainage
If it's all flat, the floor drain is just a decoration, and the water is everywhere
-
It's a must! Because:
1.To ensure that the surface water is able to flow out completely! Generally, the difference between the doorway and the floor drain is 2The drop is too small, the water flow is not smooth, and the water is easy to overflow the doorway.
3.If the drop is too large, it will tilt and affect the appearance of the washbasin when it is installed.
The bathroom area is not large, and it is best to be paved, otherwise there are too many pieces on the edge, which is not conducive to waterproofing.
The toilet is a little slanted, but it doesn't matter much if it's installed firmly and won't swing, and if the toilet moves, it's best to reinstall it. The following are the precautions for installing the toilet: 1. Squatting in the pit to change the toilet, first measure the distance from the center of the drain to the wall. >>>More
It looks like the tilt angle is a little smaller, and the water on three sides can naturally go in the direction of the floor drain.
1. The ground base treatment should be smooth 2, and the angle between the wall and the ground should be rounded 3The waterproof coating should be evenly brushed enough on both sides 4The height of the waterproof coating of the wall should not be less than a meter. >>>More
Don't be anxious if the bathroom leaks, first observe the leakage, first judge the leakage place of the toilet leakage, do the leakage test and analysis, and find the problem of water leakage. There are generally three types of water leakage: >>>More