The ceiling is tiled below the upper edge of the window frame and has no opening. How to make up for

If your ceiling is integrated, it is very simple, in the red frame you draw, ask the carpenter to nail a blockboard (leveled with the mosaic), and hang the mosaic centimeter below. In order to cooperate better, it is best to wait for the ceiling master to do it, and then call the carpenter to nail on site.

Change the ceiling scheme, hang a little higher, slightly lower than the pores, and make a row of suspended lockers under the pipe. Some things don't look messy when you put them in, and they look a little more elegant.

In the upper part of the window, the lower part is flush with the lowest part of the ceiling, making a curtain box, which can not only cover the gap in the upper part of the ceiling, but also play an aesthetic role.

If there is a special reason, just change the window, first-tier cities should be easy to find the kind of glass between the automatic venetian window finished windows, can be customized, the price is about 300 1000 per square meter. The budget is ample to consider, and it's pretty too. In this way, it is good to lower the automatic curtain to the height of the ceiling, and only the blinds can be seen inside and out.

The glass on the window rungs upstairs can't be opened, right? In the room, seal the glass on the window rungs of the plate bar to make it like a wall, and add a piece of frosted glass or similar opaque material between the plate and the original window glass. The disadvantage of this is that the windows are smaller than the original, and the lighting is sacrificed.

This carpenter will help you out! Three places in my house are like this.

Saw a blockboard, the length and width just seal the upper part, paint it white, dry with white glass glue on the upper side of the inner side, so that when the ceiling has a side to rely on, the inner gap can be used as a box to install curtains, and the outside can not see the situation on the top!

The problem is, when you make a suspended ceiling, you don't make it convex, and the edge is directly leaning against the sliding window, right!? To be so, this side is dismantled and redone.

There is a more economical way, plant some vine plants, and when it grows up and climbs up, it will cover these. Or buy some plastic plants to decorate, or a combination of the two.

If this vertical plane is made of aluminum gusset, I am afraid it is not so easy to close the edge.

It is recommended to use gypsum board to seal, the exposed surface with some waterproof paint to evenly brush the map, place the moisture and mildew, and then paste the soft mosaic on top (relatively light, not easy to fall) This is much easier than removing and re-doing the aluminum buckle plate, and the effect is also good.

This is really not good-looking, the gusset can be raised as much as possible, and the space is really a little annoying. For the sake of beauty, I removed the window and sold it, and made a new window, and let's go down in height.