What problems should be paid attention to in the maintenance of solid wood furniture?

1.Keep the floor dry and clean, and avoid mopping the floor with a wet mop or scrubbing with alkaline water or soapy water, so as not to damage the brightness of the paint and damage the paint film. Clean the floor with a dry mop or wringed out wet mop, and use floor wax or floor maintenance oil every one to two months.

2.If the heating or other water leaks on the ground, it must be wiped clean in time, and it cannot be directly exposed to the sun or baked by an electric stove, so as to avoid drying too quickly and cracking the floor.

3.If the painted floor is not lived for a long time, do not cover it with plastic sheeting or newspaper, otherwise the paint film will be sticky and lose its luster after a long time. Do not put hot water tubs, hot rice cookers and other objects directly on the floor, and should be cushioned with wooden boards or straw mats to avoid burning the paint film.

4.If there are oil stains, you can use a rag or mop dipped in warm water or a small amount of laundry detergent to wipe it. If the stain is severe, you can gently wipe it with high-quality sandpaper or steel wool.

5.After laying the painted floor, try to minimize direct sunlight to avoid excessive ultraviolet exposure, premature cracking and aging of the paint. Furniture placed on the floor should be padded with rubber or other soft objects to prevent scratching of the floor paint.

6.Keep the indoor air humidity balanced, the indoor air humidity should be kept between 40 and 80, humidification measures should be taken when it is lower than 40, and when the air humidity is higher than 80, it should be dehumidified. More can be viewed on the website of Jingguang Huayi Company.

1. Pay attention to the cleaning and maintenance of the surface of the furniture. Regularly use a pure cotton dry and soft cloth to gently wipe off the surface dust, and every once in a while, use the wet cotton silk to wring out the moisture to clean the dust in the corners of the furniture, and then use a clean dry and soft muslin cloth to wipe it;

2. If there is dust on the furniture, do not sweep it with a feather duster. Because the flying dust will fall back onto the furniture. Dust should be wiped off the furniture with a semi-dry and semi-wet rag so that it will be wiped clean.

3. Avoid using alcohol, gasoline or other chemical solvents to remove stains. If there are stains on the surface of the furniture, do not rub it vigorously, you can gently remove the stains with warm tea, wait until the water volatilizes and apply a little light wax on the original part, and then gently rub it several times to form a protective film;

4. Avoid scratches with hard objects. When cleaning, do not let the cleaning tools touch the furniture, and pay attention not to let hard metal products or other sharp objects collide with the furniture, so as to protect its surface from scratches;

5. Keep away from heat sources. In winter, it is best to place the furniture about 1 meter away from the heating current to avoid long-term high baking, which will cause the wood to dry and crack, warp and deform and the paint film to deteriorate;

6. When using pure solid wood furniture, the environment should be kept as stable as possible, especially the temperature and humidity should not change drastically, otherwise it will lead to the deformation of the furniture;

7. Avoid direct sunlight. It should be avoided as much as possible to avoid long-term exposure of outdoor sunlight to the whole or part of the furniture, and its placement is best in a place that can avoid sunlight, or use transparent tulle curtains to separate direct sunlight, so that it does not affect indoor lighting, but also protects indoor furniture;

Dust removal should be done frequently, as dust rubs against the surface of solid wood or mahogany furniture on a daily basis. It is best to use a clean, soft cotton cloth, such as an old white t-shirt or baby cotton cloth, etc. Remember not to wipe your furniture with sponges or dishwashing utensils.

When dusting, please use a soaked and wrung out cotton cloth, because wet cotton cloth can reduce friction and avoid scratching furniture, and it also helps to reduce the adsorption of static electricity to dust, which is conducive to removing dust from the surface of furniture. However, it should be avoided that moisture remains on the surface of the furniture, and it is recommended to wipe it again with a dry cotton cloth.

CleaningIn order to remove traces from airborne contaminants, cooking fumes, smudges from handling and residues from glazing, we recommend using a special furniture cleaner. This solvent can also help remove excess wax.

Wax regularly, every 3 months, to apply a layer of wax to the furniture. Before using polishing wax for furniture, check whether the surface of the paint layer is intact. For newer solid wood furniture, the surface dust should be wiped off with a muslin cloth first, and the stains that have been left for too long or are difficult to remove can be wiped with a cotton cloth dipped in a small amount of gasoline or alcohol.

Then use a small piece of cotton cloth dipped in an appropriate amount of varnishing wax to coat a large area, and then use a larger dry cloth to rub the wax evenly according to the circumferential block, before waxing, the old wax should be wiped off with milder non-alkaline soapy water, and the waxing should not be too dense, otherwise it will block the pores of the wood. Over-waxing can also damage the appearance of the coating. American solid wood furniture is simple and natural, dignified and elegant, but due to the change of wood moisture content, it may be deformed or cracked, so it needs special care, especially in this hot summer.

For example, it can not be directly exposed to sunlight for a long time, it cannot be too cold or extremely hot, and too dry and humid environments are not suitable for solid wood furniture. If the temperature and humidity change too much due to frequent switching on and off of the air conditioner, even qualified solid wood furniture products will sometimes deform and crack.

Daily care to avoid allowing sunlight to irradiate the surface of furniture for a long time, or it is easy to lose the balance of moisture inside the wood and cause cracks; In the drier environment in autumn and winter, it is necessary to regularly use artificial humidification measures to replenish the excessive loss of water, such as wiping furniture after wetting water with a soft cloth; Maintain a good humidity, the ideal humidity is around 40, if you use the air conditioner for a long time, you can put water next to it. The temperature difference should not be too large, so as to avoid the air conditioner being turned on and off, resulting in drastic temperature changes; Avoid placing excessively hot items directly on the surface of the furniture, as this will damage the protective paint and wax on the surface of the furniture.