Is it better to have a solid wood multilayer board or a solid wood particle board?

Each has its own advantages and disadvantages, multi-layer board is very stable, waterproof performance is also better, it is generally recommended to use it as a custom bathroom cabinet or bookcase, particle board is very environmentally friendly, like the imported EGGER board can reach the F4 star environmental protection standard, it is recommended to use it as a cabinet or wardrobe, generally like a balcony cabinet, shoe cabinet, imported decorative cabinet with domestic particle board on it.

Multi-layer waterproofing is better but less environmentally friendly, and is generally used for toilets or balconies. Imported particle board is environmentally friendly, and the holding ability is good, so you still choose particle board or solid wood board for cabinets.

There is no way to compare this, both plates have advantages, and it depends on where they are used. Solid wood multi-layer panels are wear-resistant.

Good waterproof performance, solid wood particle board has good nail holding power. Environmental protection.

I think it's solid wood particle board.

The advantage of solid wood particle board is that the use of adhesive is very small, that is, it represents good environmental protection, compared with the real solid wood board, the board surface is wide, the appearance is smooth and smooth, there are no knots, insect eyes and anisotropy and other shortcomings, no warping, no cracking, high physical and mechanical strength, longitudinal and transverse strength equal, sound insulation, mildew prevention, economy, heat preservation, etc., and the ability to hold nails is one of the strongest in similar products. The solid wood multi-layer board is not a particle board or MDF and other things, strictly speaking, it belongs to the category of solid wood board, multi-layer solid wood board is a layer of very thin solid wood vertical and horizontal layer by layer superimposed processing, but the nail holding force and stability are not as good as solid wood particle board.

Solid wood cabinets need to pay attention to the following points when maintaining solid wood doors, you need to use soft cotton cloth when cleaning solid wood door panels, soak the soft cotton cloth in warm water and wring out the water, wipe the solid wood cabinet door panel. If you need to clean more completely, you can use some neutral detergent mixed in warm water, and then soak and wring it out with a soft cotton cloth, gently wipe the surface of the solid wood door panel, and use a dry soft cotton cloth to quickly dry the moisture on the surface of the solid wood door panel after wiping, which can effectively prevent water traces, grease or other dirt from leaving traces on the solid wood door panel. It is inevitable to use some neutral detergents to maintain solid wood cabinet doors, but this does not mean that any cleaning products can be used to clean solid wood cabinet doors, such as harsh chemicals, bleach, etc.

Hope mine can help you.

Solid wood multi-layer board is good, detailed as follows:

Compared with plywood in the ordinary market, multi-layer plywood has small deformation, high strength, good internal quality (small holes and no delamination after sawing), good flatness, and can produce 5-40mm different thicknesses.

Because the multi-layer solid wood board has the characteristics of not easy to deform and good performance of adjusting indoor temperature and humidity, the surface layer of solid wood veneer material has the texture and feel of natural real wood, so it is more selective.

Multi-layer solid wood board has good structural stability and is not easy to deform. Due to the vertical and horizontal gluing, high temperature and high pressure, the deformation defects of solid wood boards are solved from the aspect of internal stress. In the production process, self-made high-quality environmentally friendly glue is used to make the formaldehyde emission limit of the product meet the national standard requirements, which is green and environmentally friendly.

Picking Tips:

1. Multi-layer boards are not suitable for engraving on the surface, which is understood by many people in the industry. There will be burrs after carving, so it is not recommended to do carving.

2. The base layer of solid wood multi-layer board is mainly weight and thickness, the quality of the base material of the heavier board is relatively excellent, and the base material of the solid wood multilayer board on the market is mainly poplar and pine. The thicker the thickness of the base layer, the higher the price and the stronger it is after paving.

Which is better, solid wood particle board or solid wood multi-layer board.

The advantage of general solid wood particle board is that the amount of adhesive is very small, which means that its environmental protection is very good, it is compared with the real solid wood board, the board surface is wide, the appearance is smooth and smooth, there are no knots, insect eyes and anisotropy and other shortcomings, no warping, no cracking, high physical and mechanical strength, longitudinal and transverse strength, sound insulation, mildew prevention, economy, heat preservation, etc. However, when it comes to wardrobes, multi-layer solid wood boards are better, because the area of multi-layer board bonding is less than that of solid wood particle board, and its environmental protection level can reach E1.

Custom wardrobes are liked by more and more people who decorate new houses because of their tailor-made, fashionable and beautiful, personalized and practical characteristics, but many people go to physical stores to see the model, and they begin to make difficulties again.

A solid wood particle board is a wood-based panel made of wood or other lignocellulosic materials, which is made of wood or other lignocellulosic materials, and is glued under heat and pressure after applying adhesives, and a large dose of industrial glue makes it release high formaldehyde. The flatness is poor. Of course, it is not easy to deform with more glue, and the nail holding force is good.

The principle is the same as that of MDF. The cost is low, and it is the first choice of wardrobe manufacturers.

2. Multi-layer solid wood board, also known as plywood, is made of criss-crossed multi-layer boards as the base material, selected high-quality precious wood as the panel, and made by high temperature and high pressure in the hot press after being coated with resin glue. It is not easy to deform and crack, the dry shrinkage and expansion system is very small, and the indoor temperature and humidity are regulated. Solid wood multi-layer ecological board, which is known for environmental protection, has become the new favorite of customized home furnishings.

And there is no need for paint, and there are many colors. The E0 level solid wood multi-layer ecological board decoration children's room is also very good.

Three. Compared with solid wood particle board as a cabinet body, multi-layer solid wood board is relatively more compressive. The environmental protection factor is higher. The quality is more guaranteed, and it is an excellent representative of the new generation of wardrobe plates.