-
Anonymous users2024-01-24The water output of the faucet is too small, and the water pressure cannot push the gas water heater to work. You can remove the filter screen of the faucet, if there is limescale deposit, you can put vinegar water bubbles, and then clean up and then put it on. In this way, the water flow can be larger.
-
Anonymous users2024-01-23It is very likely that the hot water in your basin is connected to the wrong one and is connected to cold water.
According to the regulations, gas water heaters can only be installed in the kitchen to be safe, so it is very convenient to wash vegetables in winter.
It is related to water pressure, it is easy to start far away, the plastic film inside the gas water heater is broken, I used to use the Chigo water heater every other year, this phenomenon will appear, I have to call someone to change it once, it costs dozens of yuan, and the cost is less than a dime. . . Caused by high water temperature.
The distance between the two rooms is 10 meters, but the pipe is not a straight line, and the upper and lower turns are actually much longer, and all the mixing valves (whether open or closed) should be adjusted to the hot water side when draining, so as not to mix with cold water to increase the drainage time, and the circulation mechanism should be laid at the end of the water to lay a pipe to the water heater, and the water of the hot water pipeline will be circulated to the water heater for heating when the circulating pump is installed and the water is boiled. It is not good to run another pipe after decoration, which will also increase the heating time.
The main reason for this situation is that the pressure of the tap water is too small, and the shower side is both in the lower head and the shower head in comparison, and the water pressure cannot make the gas water heater. >>>More
Your question is:
The gas water heater is installed outside the balcony. >>>More