Is it okay if the cement on the top tile of the bathroom is not filled?

Or fill the cement with sticky solid, otherwise after a long time, there is a sound of hollowing when you step on it, and it feels like it is not to be real, I think it is not filled up by workers cutting corners, this practice is unacceptable.

The cement of the top layer of the bathroom tile is not filled, yes, the current bathroom tile he pastes this tile when the cement will not be filled, but the four sides and four directions are filled, the middle is generally empty, directly pressed up, the construction party will not fill all the cement of this tile, unless you ask for it, generally speaking, it will not fall down you rest assured.

Answer pro, hello, yes but you have to do a good job of waterproofing, the cement of the top layer of the bathroom tile is not filled, the current bathroom tile he pasted this tile when the cement will not be filled, just fill in all four directions, the middle is generally empty, directly pressed up, the construction party will not fill all the cement of this tile, unless you ask for it, generally speaking, it will not fall down, you can rest assured.

Dear, it won't leak. Bathroom waterproofing does not have any conflict with the pasting of tiles and does not have any impact. Because waterproofing only acts on the ground and on the ground reverse 15 20 cm thickness is only centimeter (non-waterproof cloth operation.

Tarpaulin operation nearly centimeter). Paste tiles must first lay 2 5 cm to the ground (depending on whether the ground is flat or not) bottom ash. to be able to paste the tiles.

Note: The floor tiles of the bathroom should be laid in the direction of the floor drain, and each brick should have a centimeter inclination for the drainage of the bathroom floor. The phenomenon of tile paste hollowing, mainly lies in the construction of construction workers, and remember to avoid stepping on it within 48 hours after the tile is pasted to prevent the release of ceramic tiles from causing gaps and hollowing.

By the way, this shouldn't be a large-scale hollow drum.

A lot of empty questions to ask.

underneath the floor. Answer pro, there are two phenomena of tile hollowing. It is recommended that you check which one it belongs to first? One situation is that the original brick is separated from the cement connection layer used for the wall, and the tile can be removed with a light grip. The second situation is that the brick and cement are connected relatively firmly, and the cement is the foundation of the wall itself.

A hollow drum appeared on the layer. The consumer takes a small hammer and taps the surface of the tile with a hollow drum and listens to the sound, if the sound is crisp, it is the first case; If the sound is muffled, it falls under the second case. If the cement and the base layer of the wall appear empty.

Drums, and only one or two bricks hollow drums, do not affect the use, it is not recommended to replace them immediately. You can wait until the tile can be taken off and reattached with silicone. If the entire wall is hollow in a large area, it may fall off and hurt people.

Replace it immediately. However, it is necessary to remove the tiles of the entire wall and redo the base, so in this case it is recommended to ask a professional to replace it.

Decoration regardless of the size of the house, make a list of items to be done, and set up furniture, sanitary ware, lamps and lanterns ......Look first, ask about the price, size, color, take a photo to find a design to help you plan and adjust, and then take this design and list to ask the decoration company to give you a quotation to list the price and material table, when you find three quotations you will know how much it costs according to your requirements.

After drying, you can fill it in.

Yes, you just need to know that the waterproofing is done.

The tile cement is not filled and not firm.