Do I need to install a pressure strip between the solid wood floor and the doorway? What are the rea

Updated on Solid wood 2024-06-20
3 answers
  1. Anonymous users2024-01-24

    There is no difference, there is no need to install. If it is installed, it will at least look good from the user's point of view, and it can also earn more silver taels from the decoration company. If it is not installed, there is no loss, and there should be a scale for thermal expansion and contraction.

    Of course, the specific problem of specific analysis, if there is a drop in the height of the ground, it should be installed so a small strip, reduce wear and tear, and indeed protect the floor, the general indoor floor tile bricks (or door stones) are paved to the outside of the wall, 2cm higher than the kitchen or balcony or slightly higher or average (consider whether you often have water on the ground), the bathroom must be 2cm high. The sliding door is generally set in the middle of the wall, and if it is pushed and pulled to both sides of the door opening, the floor tiles in the direction of the door need to be paved in this position.

  2. Anonymous users2024-01-23

    It doesn't have to be installed, and the strip belongs to the transition.

    If there is no height difference between the door stone and the ground inside and outside the house, you need to add another buckle to avoid the stiff overlap of stone and wood products.

    Remember that if the paving height of the door stone is higher than the ground, the edges on both sides should be cut to achieve a smooth transition effect.

  3. Anonymous users2024-01-22

    My answer: dispensable.

    If it is installed, it will at least look good from the user's point of view, and it can also earn more silver taels from the decoration company.

    If it is not installed, there is no loss, and there should be a scale for thermal expansion and contraction Of course, the specific problem is analyzed, if there is a drop in the height of the ground, a small strip should be installed to reduce wear and tear and indeed protect the floor

    Or the junction between the floor tiles and the floor of the bathroom, it is natural to install it to avoid liquid corrosion as much as possible

    But then again, if it's not the above two special cases, why pretend? Isn't it good to go straight to full bed?

Related questions
Do you need threshold stones for wooden floors in bedrooms and living rooms?
1 answers2024-06-20

The junction of the wooden floor of the bedroom and the living room is not installed, leaving expansion joints.

What material is good for the door strip between the solid wood floor and the floor tile?
1 answers2024-06-20

The effect of aluminum alloy is better, it does not change color for a long time, and Hengtong Xinhong anti-static flooring.

Is it necessary to use a doorstone between the living room and the dining room?
2 answers2024-06-20

This can not be installed with a door, but the doorstone must be wanted, such as the overflow of water in the kitchen, this will play a role, and there will be a reminder to enter the kitchen and enter the living room.

Should the male and female of the decoration solid wood floor be glued?
2 answers2024-06-20

Solid wood flooring does not need to be glued, and it is easy to deform after thermal expansion and contraction after gluing. >>>More

Do you need doorstones for flooring throughout the living room and bedroom?
2 answers2024-06-20

Not necessarily.

One way is to lay sill stones to create a clear transition zone. >>>More