How to deal with a floor drain leak in the bathroom

Floor drain leakage is a common leakage disease. Generally, it is caused by the lack of compactness of the concrete around the floor drain pipe and the lack of waterproofing. In fact, this kind of leakage treatment is very easy to do.

Use CF-2000 cement-based waterproofing agent to treat it yourself in half a day. The specific steps are: Find a chisel and use the chisel to make a 2-3 cm wide annular groove around the floor drain.

The depth is about 3 cm. However, if there are loose or gaps around the pipe during the slotting process, it should continue to be chiseled. Until the above situation is cleared up.

Then clean the groove with a clean water brush. Fill the tank with CF-2000 cement-based waterproofing agent in the form of paste, and then use it when the waterproofing agent collects water (about 30 minutes), and then compacts and smooths it with a press. Make sure you never leak from the floor drain opening.

If you have asked the decoration company to decorate before, it will generally be guaranteed within five years, if not, you must ask the master to check it, it is necessary to redo the waterproofing.

Let the professional master repair it again, and do a good job of waterproofing, simple.

Floor drains and leaks in the bathroom are very common problems, and if they are not dealt with in time, they will bring a lot of inconvenience to life. Here are some ways to deal with it:

1.Clean lead rough leakage.

Shouhuai Bi first needed to clean the floor drain and drain pipe. Use a professional floor drain cleaner or physical plugging device to clean the dust, hair, stones and other materials that are blocked from the stool to ensure that the water can flow.

2.Check the seals.

Check whether the seal of the floor drain is loose or aged, and if there is a problem, the seal can be replaced.

3.Check the pipeline.

Check whether the pipeline is leaking or blocked, and clean or repair it in time if there is a problem.

4.Look at the drains.

If the water flow of the floor drain is small, you can slowly fill the water at the mouth of the floor drain to observe the water flow of the drainage pipe, if you find that the water flow is slow or there is a backflow phenomenon, it means that the drainage pipe may be blocked, and the drainage pipe needs to be cleaned.

5.Replace the floor drain.

If the problem cannot be solved after the above methods, you can consider replacing the floor drain.

In short, floor drain leakage in the bathroom is a common problem, which requires us to find the problem in time and take corresponding measures to ensure the smooth daily life.

You need to pry the tiles around the floor drain, then reconnect the floor drain to the sewer pipe, and finally repair the waterproofing near the floor drain, and then repair the tiles and pave them.

Second, the waterproof layer of the ground is not done.

1. Brush the first cautious trace of waterproof coating.

2. Brush the second time to prevent wide spike water paint.

3. Lay a protective layer.

4. Closed water test.