-
Anonymous users2024-01-24I'm going to keep it simple, and I hope you can understand it.
The white wall that you usually see at home is usually a latex paint wall, or a big white wall, and the big white or latex paint wall is shoveled off, and what is exposed is the putty wall, which is the base layer of the wall paint, which mainly plays a role in leveling the wall and increasing the adhesion of the wall paint.
What we usually mean by "scraping putty" means that the number of times to scrape putty is determined by the flatness of the wall, which is generally twice.
The first time, when the putty is scraped, the rubber scraper is scraped horizontally, a scraper is followed by a scraper, the joint shall not be left behind, and the final end of each scraper should be clean, smooth, to achieve flat, uniform, smooth, and do not leave the joint, after the putty is dry, it shall be smoothed and polished with sandpaper, and there shall be no scratches. Sweep the powder clean after polishing. Then carry out the second full scraping putty, and the second time should be vertically full scraping, the same as the first one.
Hope it helps.
Thank you for adopting!
I think the best way to solve this problem is to communicate with the owner of the house and explain everything clearly, which is the best.
It is recommended that you use a brush to brush, etc., you had better not comb your hair everywhere, it is easy to deal with it within a certain range, if there is a vacuum cleaner, try it....For hair loss, it is recommended that you use an anti-hair loss shampoo.
The scrap-resistant board used for furniture is generally made of polyurethane board (which looks light yellow and transparent from the outside), and the polyurethane board is more wear-resistant and elastic.
Plasterboard wallpaper, how to make the wallpaper last longer, how to make the wallpaper not moldy in wet weather, the steps of construction are very important. Only by doing enough of these items can you rest assured, steps: 1. Batch putty (choose big brand water-resistant putty) to scrape flat; 2. Dry thoroughly and polish; 3. Upper moisture-proof varnish (moisture-proof) 4. Glue (high-quality wallpaper glue) 5. Paste wallpaper. >>>More
Yes, but directly on the gypsum board (board) batch scraping putty powder is easy to fall off (ash) phenomenon, to lay the primer first, it is recommended to use home taxi board worry-free putty for priming (TB), to dry and then scrape the putty powder.