-
Anonymous users2024-01-24The ceiling has gusset and keel.
1.There are light steel keel + gypsum board ceilings, as well as wooden keels + gypsum board ceilings. This is used for the ceiling in the living room, dining room, bedroom;
2.Light steel keel + aluminum gusset for kitchen and bathroom Aluminum slatted ceiling, PVC slatted ceiling.
Share a few precautions for choosing a gusset, which should be helpful for your home choice.
Gusset of the suspended ceiling]:
The first generation of products is gypsum board, mineral wool board; The second generation is PVC; The third generation is a metal ceiling.
The aluminum gusset in the metal ceiling is better, and the aluminum gusset on the market is also divided into the following grades:
The first type of aluminum-magnesium alloy also contains some manganese, the biggest advantage of the material is that the oxidation resistance is good, and because of the addition of an appropriate amount of manganese, the strength and stiffness have been improved, and it is the best material for the ceiling.
The second type of aluminum-manganese alloy, the strength and stiffness of the plate are slightly better than that of aluminum-magnesium alloy, but the oxidation resistance is slightly insufficient;
The third type of aluminum alloy, the plate contains less manganese and magnesium, so its strength and stiffness are significantly lower than that of aluminum-magnesium alloy and aluminum-manganese alloy, and the oxidation resistance is average.
-
Anonymous users2024-01-23If you want to install an integrated ceiling, you don't have to worry about the material or anything will be calculated, the modern integrated ceiling is not bad, and the price is not expensive.
-
Anonymous users2024-01-22Now the integrated ceiling is multi-purpose light steel keel, including hanging bars, connectors, main bones, bone, and edges.
What material is good for material ceiling? PVC material ceiling is more common now, with light weight, easy installation, waterproof, moisture-proof characteristics, and there will be a lot of patterns on the surface for everyone to choose, the price will be relatively cheap, simple cleaning, especially suitable for large areas. Large units like this material will choose because it is cheaper, very cost-effective, and easy to clean. >>>More
Main materials such as wood keel or light steel keel, gypsum board, putty powder, latex paint, etc., as well as auxiliary materials such as caulking tape, adhesive powder, white latex, and straight nails.
According to the different types of integrated ceilings, the materials used are not the same, and the more common ones are the following: 1Waterproof plasterboard: >>>More
Because the lamp model hanging in the ceiling and the wall should be replaced frequently, it is best to use screw-resistant materials, and it is best to use 5*3 wooden keel to make a 300*300 shelf and brush fireproof paint, and then use a 4mm board to make a ceiling bottom plate, and seal the decorative panel. It is best to fix the lamps at the intersection of the wooden keel frame, in order to ensure safety, you can also install iron wire on the wooden keel frame to increase the load-bearing of the shelf. Due to the different directions of force on the wall lamps, 2*3 wooden keels can be used to make 300*300 shelves and brush fireproof paint, and 9mm boards are used as base plates to seal decorative panels. >>>More
It's all 85 ah, hehe. It depends on the width of the specific PVC board and the area of the aluminum gusset. There is generally a loss of 3-5%.