-
Anonymous users2024-01-24If the leakage point is the position of the pipe through the floor, it is easy to do, clean up the hole edge of the floor drain and so on, and then do a waterproof, and then plug the hole after it is dry, and the ground is water-raising for 24 hours, there is no water trace downstairs, and then reinstall the toilet floor drain.
If the leakage is in the middle of the floor slab, then open the floor tiles at the corresponding position upstairs to find the leakage. After redoing the waterproofing, it is necessary to maintain the water test, and then restore the floor tiles after passing the test.
-
Anonymous users2024-01-23Water leakage occurs, you have to find the cause first, the leakage is a water source, first try the water, there is no problem to try the water, and then try whether it is really seeping from the brick joint, and there is water from other places! Analyze the same, find the reason, and finally talk about the treatment, more information, better suggestions, the best photos, free professional technical consultation for concrete waterproof leakage repair, exempt from repairing today, leaking tomorrow; Repair every year, the trouble of leaking every year.
-
Anonymous users2024-01-22Don't worry.
The description of isolation should be that there is no tight seal around the mouth of the sewer pipe (penetrating the ground) and causing water leakage, not a leak in the buried pipe. It is recommended to find a mason master to rewash and fix the area around the pipe mouth.
-
Anonymous users2024-01-21First of all, you don't add in detail, according to my experience, let's give you a few tricks, I didn't see the scene in person, but you can solve the problem by doing what I said, don't use water within the first five days, let alone take a bath, five days later you see if the downstairs shed is dry, if it doesn't drip dry, then it's not a water pipe leakage, if it also leaks, the pipe is broken, if your home is a pipe buried in the wall, then it's right, the solution is to change the pipe, go to the pipe to save money and don't smash the ground, start to change from where your water meter valve is, Replaced with PPR pipe, this kind of pipe is not only resistant but also inexpensive, I am in the plumber industry in Shenyang, I don't know if I can help.
Find the cause of leakage, if the root of the floor drain pipe leaks, open the root of the floor drain pipe and re-do waterproofing; If all the pipe roots are leaking, you need to open all the bathroom floors to do the waterproofing again. In particular, after the waterproof layer is done, it is necessary to test the water and check that there is no leakage before the ground surface layer can be restored.
It belongs to the repair of damage to public facilities, and you can use the repair fund, and you do not need to pay for it; If the property does not agree, you can report it to the property management office!
First, if the bathroom is leaking water from the waterproof layer, not the upper and lower water pipes. They can be repaired without planing tiles. The maintenance method is very simple, which is to use a new type of penetrating waterproofing agent to waterproof the surface of the bathroom, so that the water does not enter the ground and flows directly from the waterway. >>>More
The title of the question is unclear and confusing. If you ask about the division of responsibilities, the answer is definitely upstairs responsible. >>>More
If the pipe damage was caused upstairs or related to the upstairs, and they didn't stop using the sewer in time, they asked them to compensate and said the past.