What to do if the dripping water at the connection between the toilet faucet and the water pipe pene

Will the water drip at the interface between the toilet faucet and the pipe, and can it seep into the bathroom next door? Of course, it will be sent next door, or even downstairs, so hurry up and fix your faucet pipe, don't affect other neighbors, that's not good, if it seeps into people's homes, you have to lose money, don't take it seriously.

There needs to be an angle valve, which is available in hardware and bathroom stores. Amico is better, generally dozens of dollars a piece. This thing is still more important, its working pressure is relatively large, and it is easy to break and cause bursting and leakage after a long time. >>>More

Take out the broken buds and replace them with new ones.

If it is boiling water, the middle mobile interface is leaking, that is, the sealing ring is damaged, if the water is not boiling, then consider replacing the new one, close the angle valve below, use a wrench to rotate the lock of the connecting pipe counterclockwise to remove it, there is a fixing screw near the top of the basin under the faucet, remove the fixing screw, and the faucet will be taken down, but the operation space is small, it is not good to use force, it is best to remove the connecting hose, remove the whole basin and replace it, after replacing it in the installation basin, Use the hand to light the blind empty sealant to seal the circumference of the basin on it, it is difficult to operate yourself, and it is advisable to buy a good faucet to find the property to which it belongs.

The faucet and sink are not glued together, the lower part of the faucet has a screw, which is used to connect the sink, if it is loose, you just need to tighten the nut, and you see if the rubber pad is broken, which is also the reason for loosening, with a good rubber pad, it is not easy to loosen.