-
Anonymous users2024-01-24After pouring the concrete of the floor slab, take advantage of the softness to insert 200 spacing of the embedded steel bar head along the bathroom wall, expose 150mm, and the diameter is not less than 10mmAfter the concrete is solidified, the formwork is set and the door opening is flashed. The pouring height is not less than 200mm of C20 concrete.
What do you mean by waterstop? There is no regulation that the toilet must be made of a waterstop, because the waterstop is usually set at the position of the concrete construction joint, but there is a regulation that the toilet must be made of no less than 200 high plain concrete flanging.
The "Guidelines for Preventing Common Quality Problems" issued by the local government stipulates that the wall foot of the bathroom should be poured with the floor slab to build a guide wall not less than 200 meters high. The floor and wall should have a waterproof layer.
The waterstop is not concrete, how can it be compressively tested, and if you want to do the laboratory, it will not give you a report.
The process flow of concrete construction on the toilet with waterstop: cleaning the periphery of the bathroom, positioning and pay-off, brushing off surface impurities, supporting the reverse side template, pressure water washing, inspection, brushing plain slurry, concrete pouring, and curing. >>>More