-
Anonymous users2024-01-24Use sandpaper, I don't know where the cement remains in your bathroom, if it is a floor or wall tile, as long as it is not afraid of grinding, you can use sandpaper.
-
Anonymous users2024-01-23After wetting with water, wipe with a scouring pad.
-
Anonymous users2024-01-22Generally, the decoration shovel is carefully scraped, and the soft wire brush is used to clean it later.
-
Anonymous users2024-01-21Before it's dry, rub it back and forth with your feet, and it'll be gone for a while, or when it's dry, you can get it off with anything.
You can clean it with a wire brush or utility knife, and then clean the floor, or you can go to someone outside who specializes in cleaning and sanitation to help you clean it.
Hello dear, in the process of construction, if you accidentally drip the beauty joint agent on the tile, and the tile belongs to the vitrified brick, this kind of tile has a feature that it is not easy to be dyed, if it is only some residual beauty joint, the surface is dirty. If it solidifies, it can be diluted with alcohol, or soaked in hot water for a period of time, and then used alcohol to dissolve the hand. If you don't have alcohol, you can also use a slightly higher strength of alcohol. >>>More
It is better not to change the structure of the building easily, it is not advisable to do so, it is quite dangerous to do so.
Ventilation and lighting are all things to consider.
It is recommended to install lighting at the time. >>>More
Ground treatment: pay attention to waterproof and non-slip. The floor tiles laid on the floor of the bathroom are best to use non-slip floor tiles with raised patterns, which not only have good waterproof performance, but also will not be too slippery even in the case of water. >>>More