-
Anonymous users2024-01-24When installing the toilet, there is a sealing ring at the bottom, and the two small holes on the left and right are used to install the fixing screws.
Method: Lift the toilet, clean the bottom, check the sealing ring, if the elasticity is strong and there is no break, reinstall it firmly, if possible, add fixing screws, and then seal with sealant; Because most toilets are siphon drainage, if there is an air leak, the suction power will be reduced, so the air leakage will also affect the flushing effect.
-
Anonymous users2024-01-23Those two small holes are fixed, and your toilet may be offset if it is not glued.
1 All are generally like this, the installer looks at the distance between the center of the aperture of your toilet and the wall, and blocks one by one.
Place the toilet against the wall, and the hole facing the drain is the drain hole, blocking the other hole.
There are two holes in the bottom of the toilet, what is the purpose of each? >>>More
It is recommended to find a merchant who sells this toilet to solve the problem - choose to plug it with a special material, or replace it with a suitable one. >>>More
The two holes are not dredged by the scheme, they are the holes to be connected to the ground, and they are generally not used.