-
Anonymous users2024-01-24Remove the lid from the tank and try to press the two halves of plastic on the top of the drain valve directly by hand. If it can be washed away, it means that it is a problem with the button. This happens when the two screws on the button are shortened.
-
Anonymous users2024-01-23See if the water level is not high, or the water is low.
Is it that the small pieces inside are broken?
Turn off the switch next to the toilet. >>>More
It's time to change the accessories for the water phase. After a long time, the parts are aged and the grinding is damaged.
It's best to find a professional to fix this, or go directly to the merchant who originally bought the toilet and ask them to help you solve it.
The half-moon button you said is a button that represents the amount of flushing, and generally the toilet is a 2-level flush volume, a small amount of water, and a large amount of water. Of course, a small half moon is a small amount of water. In addition, there are some of them that are flush levels, most of which are on the side of the tank.
1. Take the lid on the toilet bowl away, and whether the small ear pressed by the hand when flushing is stuck, under normal circumstances, the ear will be pressed by itself + return) If it is stuck, the rubber gasket below cannot be reset, of course, the water has been flowing. (It may be that the screws fixing the ears are too tight or there are foreign objects plugged or the rubber transmission shaft connected to the ears is deformed, the screws are loosened or the foreign matter is removed, or the transmission shaft is corrected and replaced.) Second, look down the rubber shaft to see if the rubber gasket below (black round diameter of about centimeters, easy to find) is stuck by foreign objects, it is normal to remove foreign objects that are flattened and pressed on the toilet drain. >>>More