Is it okay to relocate the toilet drain and slot it directly on the bathroom floor?

If you follow what you said and the diagram shows, this can be moved, but you must ensure that the waterproof layer is not damaged during construction, otherwise there will be endless troubles.

Change the toilet position.

The primary consideration is accessibility.

There are several sewer pipe positions in the bathroom, don't move if you can! Hearing that reporters were going to change the location of the toilets, many project managers advised reporters to be cautious.

The decorator Xiao Ke told reporters that the projects he has done are generally to change the position of the toilet by about 10 cm, using a special toilet shifter (similar to two staggered elbows). Since the moving position is not very large, it is unlikely that a blockage will occur. If you want to move a longer distance, there is no shift to use, and the sewer pipe can only be modified.

Generally speaking, he says, they don't recommend this because the elbow junction is more difficult to handle.

According to independent designer Han Xiong, if you want to move it farther away (beyond the range of a dedicated toilet shift), you must raise the floor of the bathroom and add a water trap to prevent odor backflow while renovating the pipe. SINCE THE DIAMETER OF THE DRAINAGE PIPE IS GENERALLY 110MM, THE GROUND SHOULD BE RAISED BY AT LEAST 120MM TO LEAVE SOME ROOM FOR THE CEMENT MORTAR AND THE SLOPE OF THE SEWER PIPE.

The practice of the master of Jiuding Decoration Building is similar to what these two experts said. He said that generally new houses do not need to consider this kind of problem, because basically the developer's design is reasonable, and the problem is concentrated in the second-hand house with a smaller bathroom. If the toilet displacement distance is within 5CM, then he recommends that the landlord go to the market to buy a lifter to use, although the merchant will say that the shifter can be used for 5 15 cm toilet shift, in fact, more than 5 cm is not very effective (there will be blockage, etc.).

If the toilet is changed more than 10 cm away, then it is better to reinstall the pipe and raise the bathroom floor by about 12 cm.

In addition to considering the blockage problem, it is also necessary to pay attention to the tightness of the pipe. This is a repeated reminder from experts to the owners, especially the interface position between different pipes, to check whether there are leaks many times, to ensure that there is no leakage, sealing rings, glass glue and so on.

If the waterproof problem and drainage problem are considered well, the problem is not big, mainly consider the future service life and whether the original waterproof layer has been damaged, after all, it is part of the concealed project, ask the mason master or the master who installed the toilet on the spot.

Seeing the days is like sand between your fingers, but it is about all you have, it is hidden in the blood and bones, and it is endless.