Living room decoration method

Looking at the picture, the partition is 5-6 cm thick. According to the standard of 6 centimeters thick, talk about the construction process.

1.Put the line at the position of the partition on the original wall, and use the ink fountain line to pop up the standard position. Use an electric drill to drill holes at a certain distance (20 cm apart is enough), and fill the hole with a wooden wedge (for the convenience of nailing nails later).

2.Where the wooden wedge is laid, a 2x3 wooden keel is first fixed to the wall with nails. Brush with fire-retardant paint.

Of course, you must mark the position of the nail first, don't nail it to the back, you don't know where you opened the hole. (If you want to make the partition stronger, you can also use bone steel as the base layer, like the audio-visual cabinet below, which is suspended.) You can use bone steel to make the base keel).

3.On the upper and lower sides of the wooden keel on the wall, the white latex is coated with a centimeter thick woodworking board to make a base layer at the junction with the wooden keel, spread on the upper and lower sides of the wooden keel, and fixed with a nail gun. On the side, the gap between the upper and lower woodworking boards is sealed with woodworking boards of corresponding partition thickness, and the base layer is basically done.

4.On all sides of the woodworking board, paste the decorative panel, the wood grain color and color are different, you can choose at will, of course, if you like the white oil mixing process in the picture above, you don't care about the panel, as long as the quality is better, and environmental protection.

You can calculate the price.

The level of woodworking board is about 80-120 yuan, and each piece is converted to this partition (calculated by 18 cm wide and 6 cm thick), which is about 15-25 yuan per meter.

2.Wooden keel and glue nails are counted as 10 yuan m.

3.The panels are 3mm and 5mm thick, and the single frame is 45-70 yuan, and the specifications are also meters. Converted to the partition about 8-15 yuan m

4.In the white oil mixing process, the salary of the painter is about 40-60 yuan per square meter (regional differences and different levels of workers) is about 20-30 yuan m

5.Wood paint is good or bad, generally to 20-40 yuan square meters. Convert to get 10-20 yuan m. on the partition

6.The wage of carpentry is about 45-60 yuan m (regional differences and different levels of workers).

Add the above data to make a finished partition, which costs about 100-150 yuan

Those are all furniture, and that wall has to be load-bearing.

The furniture company's delivery staff can be directly installed.

1.Punch holes in the wall, use gyplight or carpentry boards, carpentry to do, (first use an electric hammer to punch holes in the wall, then use wood to punch into the wall holes, in the wall fixed with gypsum board, hanging in the air, but there is a wooden keel inside}

2.The installation is not a hassle, it takes an hour or two to get it done.

3.How much does it cost? According to the price of gypsum board, gypsum board is more than 100 yuan, almost dozens of yuan, counting labor, at most more than 100.

4.This rendering is not very good, and the sense of hierarchy is not strong.

Don't bother, make an eye on the wall, there is special hardware to connect, and it is also very strong, generally according to the thickness of the board, the square meter is charged, you are like this, the general manufacturer can come down for less than a thousand yuan.