The hot water pipes in the kitchen and bathroom are covered with no thermal insulation sleeves

Updated on Kitchen 2024-06-13
2 answers
  1. Anonymous users2024-01-24

    There is no need to cover the buried in the wall, but the exposed outside the wall must be covered with insulation pipes!

  2. Anonymous users2024-01-23

    and those buried in the walls shall be covered. Don't cover the exposed ones, it's too ugly, and the half of the exposed wall is not long, so it doesn't have much impact.

Related questions
In the case of not making a thermal insulation sleeve, the hot water pipe water pipe goes to the sky
4 answers2024-06-13

I advise you not to go to the ceiling, which consumes too much heat.

There is no need to install a backwater bend for the toilet stool trough drain
1 answers2024-06-13

No, because the toilet already has this function, there is no need to have a reverse bend in the back drain. >>>More

Toilet waterway renovation cold water pipe is used on hot water pipes
2 answers2024-06-13

In general, it can be mixed, but if the temperature of the hot water is too high, above 80 degrees, it is recommended to use a plastic pipe with a metal sleeve to avoid high temperature and then go out of shape.

The hot water pipe in my bathroom is PPR, and the stainless steel joint was broken in it a few days
1 answers2024-06-13

The way to teach you is to first close the main sluice gate of the water, and then use a pistol to drill into the rigid structure inside, or use a just saw to dig it slowly, and wait until it is almost time to smash it with a change cone, and smash the inside down, we have done this. Give it a try.

Is it better to use a pipe diameter of 25 or 20 for the hot and cold water pipe PPR pipe in the bath
1 answers2024-06-13

Depending on what you are using it for, if you flush the toilet and wash your hands, it is enough to consider the cost of 20. It is best to use 25 for 2-in-1 bathing, and at least 25 for delayed valve flushing.