What to do if the toilet tank suddenly runs out of water and can t be flushed

Toilet flushing is generally divided into the following situations:

1. Slight blockage of the toilet: Generally, the toilet blockage is caused by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or simple dredging tools. Toilet bowl.

2. Toilet hard object blockage: accidentally fall into plastic brushes, bottle caps, soap, combs and other hard objects when using. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

3. Aging and blockage of the toilet: The toilet has been used for a long time, it is inevitable that it will scale on the inner wall, and in serious cases, it will block the vent of the toilet and cause the toilet to drain slowly.

4. Toilet installation errors: generally divided into: the outlet at the bottom is not aligned with the drain outlet, the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet drain to be unsmooth, and the water level of the toilet tank is not high enough to affect the flushing effect.

Answer: If the button on the toilet tank lid does not respond, first of all, we should find out what the cause is, and deal with it according to different situations. If it is difficult to press the button on the lid of the toilet tank, or it is very loose after pressing, it has no effect. Then it is very likely that the spring in the toilet button is rusty and aging, or it is possible that the button is stuck by some debris, in the face of such a situation, it is relatively simple to deal with, we only need to replace the button of a toilet tank.

It may be that the toilet tank can be flushed after pressing, but the amount of water is very small and the momentum is very small. Whether the water level is sufficient to reach the amount of water flushed. If there is a problem with the water level, it is possible that the inlet valve is faulty.

And not the malfunction of the toilet tank button. In this case, the inlet valve should be checked to a certain extent.

If it is determined that the toilet tank button has failed, then there is only one replacement, which is actually a relatively simple operation. We should turn off all the water in the toilet, then drain the water in the tank, and then remove the entire lid of the toilet tank, and then remove the button part of it and replace it with a new button.

Question: There is no water tank on the toilet.

One hand and one foot press.

For the time being, you can use the basin to flush the toilet temporarily before repairing it.

You need to check if there is a problem with the inlet valve, flush valve, or overflow valve, and get the right solution!

Fill a container with water and pour it down the toilet.

It's okay to fill the water yourself in, and then press it.

Use a basin to flush the toilet first, and then repair the toilet later.