-
Anonymous users2024-01-24In fact, the installation of the sewage lifter is also the most critical part of the basement drainage system design, which directly determines the safe and stable use of the sewage lifter. Taking microboy as an example, in addition to connecting the toilet, once it involves other sanitary ware such as wash basins, showers or bathtubs, etc., a certain height difference is required so that the domestic water can directly and automatically flow into the box, and will not cause backflow, like a shower has to be raised by 18 cm.
-
Anonymous users2024-01-231. Find out the water inlet method of the sewage lifter.
Sewage lifters are generally divided into wall row type, and the so-called wall row type is a sewage lifter placed behind the toilet. There is also a traditional underground integrated type.
2. The problem of the number of sanitary ware.
The number of sanitary ware cannot exceed the requirements of the sewage lifter. If the number is increased, there is a high risk of forming an overload, which can cause damage to the motor. Therefore, be sure to connect sanitary ware according to the requirements of the product manual.
3. The height of the sanitary ware drainage pipe should be higher than the water inlet of the sewage lifter.
When connecting the drain pipe of the sanitary ware and the inlet of the sewage lifter, a certain slope must be maintained. The former is higher than the latter, which prevents the backflow of sewage. At the same time, check valves and gate valves also need to be installed on the outlet line.
4. Use live joints between pipelines as much as possible.
It is better not to connect the pipes to death, it is better to use a detachable union. This makes it easier for us to maintain it between later stages.
When the Zede ABS toilet sewage lifter is installed, it is a rear toilet that is installed on the same level as the toilet sanitary ware, and is placed behind the toilet bowl, which will not occupy additional space.
The installation of the sewage lifter is not difficult, such as the Zede sewage lifter microboy, which can be installed directly behind the rear toilet. In addition to this, it is also possible to connect drainage points such as showers, wash basins, etc.
The diameter of the sewage lifter discharge pipe in the basement of the villa is best equipped with 32mm (inner diameter of 25mm), if the original drainage pipe diameter is 40mm or 50mm, please consult us first to determine whether to install, more than 50mm of the villa basement toilet sewage lifter can not be satisfied; If you want to connect the trachea, you can take out the activated carbon filter and the rotating ball, and insert the 40mm tube directly into the vent, the vent tube needs to lead to the outside, of course, you can also choose not to take the outer tube, with the standard filter; >>>More
You can choose the model of the sewage lifter, and consult their customer service directly, the general sewage lifter is bought after the hydropower enters the site, so that it is convenient to reserve the size.
Hello! The sewage lifter can directly lift the sewage of the toilet to a certain height, and then let the sewage be discharged to the municipal pipe network through gravity, and this equipment is an integrated closed sewage lifting equipment imported from Germany, which is not only easy to install and maintain, but can effectively prevent odor emission and mosquito and bacteria breeding when used. It's just that the price is a little more expensive, and if you don't think it's suitable, you can also look around on the Internet, a lot.