-
Light steel keel, sealed cement board (toilet wall), sealed gypsum board (living room wall).
-
Move the washbasin and use glass as a partition, so you don't have to make a wall to enclose it. A few hundred dollars can be done.
This is the practice of separating wet and dry in the bathroom that is now fashionable.
-
Use a light steel keel to make a frame, about 14 cm, and then close it with a cement board or glass magnesium board, and the wall of the bathroom can be tiled and waterproof. It is also the most common and economical way to decorate.
-
Are you separated from the bathroom, do you want to put your sewer pipe in the downstairs resident's hall?
-
Use a board to separate. About 1000 yuan to get it, small things.
Recommend Jin Sali's, there are more styles, styles are also diverse, the pulley is stainless steel and silent, the aluminum frame is also thickened, and the most important thing is that the glass is of good quality and high safety performance.
The main consideration of the material of the sanitary partition is the waterproof performance, glass, plexiglass, aluminum alloy, plastic steel, stainless steel These materials are relatively waterproof and can be considered for use.
can be pasted, but it is recommended not to stick, because the partition "door". >>>More
In order to ensure that the bathroom wall board and floor tiles are jointed, and at the same time ensure that there is no broken activity of less than half a brick, the bathroom wall board adopts the form of solid paste, and the pipeline groove is removed below the solid part and smoothed with fine stone concrete. The ground waterproofing is made of a waterproof layer thick 3 times to survive, and a layer of 20mm thick fine stone concrete protective layer is made. The window sill is not installed separately, the whole brick wall is adopted, and all the open pipes in the bathroom are encapsulated according to the deepening design requirements. >>>More
Bathroom decorative bead curtains can exceed half the height of the bathroom door.