-
Anonymous users2024-01-24PVC top exhaust fan, directly on the PVS to open an exhaust fan hole, the power supply is directly connected to the lamp head, if you are not afraid of trouble, just pull a live wire from the switch close, you can control it separately from the lamp, the strength of PVC, adding an exhaust fan is no problem, no need to add keel, it is very convenient,
-
Anonymous users2024-01-23If you want to install it on a suspended ceiling, you need to use a pipe (such as a drainage pipe, but there should be a drainage place or perforated hole above the ceiling), or directly use a bath bomb with an exhaust fan. Find a decorator and ask everything you can do. Let's dress up on a case-by-case basis.
It is recommended that you use gusset, because gusset is removable, and PVC also needs to nail wooden frames, which is also troublesome, and is not resistant to aging, economical and fire-resistant.
1. First of all, open a square mouth on the PVC ceiling for installing the bath bomb, the opening size is the size of the bath bomb panel (you can drag the panel with a stroke line), and the PVC strip cut off the opening is glued to the top of the open ceiling with glass glue to strengthen the strength of the PVC opening. >>>More
The installation of integrated ceilings is different from ordinary ceilings >>>More
It's a horn with two wires. When all electrical appliances are working, they need a loop with current circulation to work.
Don't come to the power cord advanced 1 and 3
Then come out from 2 and 4 to get the air conditioner. >>>More