What should I do if the hardwood floor is bulging?

Answer to daily home life, the wooden floor laid on the ground will also be bulging, once the floor is bulging, it is a serious inconvenience to our home walking, so what to do with the wooden floor bulging, what are the solutions to the wooden floor bulging? The causes of the bulging wooden floorBefore understanding the solution, we should first understand the causes of the bulging wooden floor: 1

The ground is uneven or the ground appears sand particles cause the ground to bulge, generally before the installation of the wooden floor, the decoration team cleans the ground, for which there will be some small sand particles left on the ground, or the ground is too rough, for this reason, after the installation of the floor, in the process of people's many trampling, the moisture-proof film and the balance layer on the back of the floor are destroyed, and the moisture of the ground leads to the floor bulging. 2.Improper handling of moisture-proof measures: This kind of situation belongs to improper moisture-proof treatment during installation.

On damp floors, if the moisture-proof membrane joints are not tightly glued with waterproof tape, even if the balance layer on the back of the floor is not damaged, the floor is in a humid environment for a long time, and the moisture may still enter the floor after the balance layer is eroded by moisture, causing damage to the floor. 3.Improper use causes the wooden floor to bulge, and the bulging phenomenon caused by water ingress at the floor joints (such as:

Heating running water, large area of water ingress, etc.), is a problem of improper use and maintenance. There is only one way to deal with the bulging wooden floor, which is to re-set and adjust the size of the expansion joint, you can find the original construction personnel or ask experienced carpenters to deal with it, but try not to let it develop so as not to get worse and worse. In addition to this, we must also pay attention to the maintenance of wooden floors in daily life:

In daily life, the indoor ground should not be flooded in a large area, and the windows should be closed at any time when the rainy season comes to avoid being wet by the rain; When cleaning, try to use a vacuum cleaner or semi-dry mop to take care of it, do not use a dripping mop to mop the floor, if you accidentally spill water on the surface of the laminate floor, immediately wipe off the water with a dry cloth to prevent water from leaking from the floor joints.

If the mop drips while mopping, it will cause water to accumulate on the surface of the floor and enter through the joints with less sizing, and the floor substrate will absorb water, resulting in local expansion and blistering. In this case, the joints on the surface of the floor are partially bulging;

B. Water bulging under the floor: the surface phenomenon is that the shape of the seam bulging is more uniform, the place near the water source is heavier and stricter, and the far place is getting flatter. The places where such problems arise are:

Close to restrooms, kitchens, heating pipes, air conditioning condensate outlets, windows, etc. If the flooding time is long and the surface phenomenon is no longer obvious, you can open the floor to check whether there is a watermark to determine the cause;

C. Bulging of short joints of the floor: It is manifested as the bulging of each short joint of the long floor, which is usually caused by the moisture of the ground. The higher the bulge, the greater the moisture on the ground.

Repair program: replacement of the floor.

The arching performance of the floor is a sense of suspension when stepped on, and it will be more serious in some places.

A. The expansion joint is not reserved enough, so that the floor is arched;

B. The room is paved: when the floor is installed in more than two rooms, the door sleeve is not equipped with buckles, and the floor of the two rooms is stretched horizontally when the humidity and moisture are larger, causing the door of the room to pull each other and make the floor arch;

C. The expansion joint is nailed by the baseboard or filled in by plaster, putty, etc., so that the floor can not be stretched, resulting in the arching of the floor;

D. During the installation process, there are foreign objects left under the floor, resulting in arching;

E, the floor under the base arch, such as the original ground before the installation of the floor has a solid wood floor, after the installation of the floor due to the original floor moisture arch, resulting in the floor being arched;

Maintenance plan: lift and lower the baseboard and reserve the expansion joint again; Install buckles at the connection between the room and the room; Reinstall the baseboard and clean out the reserved expansion joints such as plaster and putty; Lift the floor and reinstall it; Remove the floor, level the floor, dry it and re-pave it.

Some of the floors in Pingcei swell with moisture after they are laid. This is mostly related to the environment around the floor, especially the foundation is too wet or the floor is flooded.

1. On-site inspection.

Sports wood floor maintenance staff, or stadium staff, when they find that the sports wood floor is soaked in water after work, don't panic first, be calm. Inspect the soaking site at the first time to eliminate potential safety hazards, such as whether there are wires, electrical appliances, flammable and explosive materials on the soaking floor, etc.

Then according to the degree of water immersion of the sports wood floor, a solution is formulated.

>2. Soak in water lightly.

If the sports wood floor is lightly soaked, the lightly soaked and damp floor can be wiped dry and ventilated. If necessary, disassemble the sports wood floor to observe whether there is water on the ground and observe whether the floor is obviously deformed. If there is a cracked bridge, it needs to be removed and dried and reinstalled.

3. Heavy soaking.

If the sports wood floor is seriously damp or soaked in water for 30 minutes, it will be deformed, expanded, and lose its luster. Such sports wood flooring is basically scrapped and should be replaced, and attention should be paid to removing the moisture under the floor and drying it.

4. Precautions.

After the sports wood floor is soaked in water, it is important to pay attention to whether it can be blown by hair dryer, exposed to sunlight, or dried, which will accelerate the serious deformation and damage of the surface of the lead source of the sports wood floor of the basketball hall.

Hardwood flooring is a high-quality flooring that is loved by people because of its elegant appearance and unique texture. However, solid wood floors can have bulging issues due to various reasons. Drumming not only affects the aesthetics of the solid wood floor, but also shortens its lifespan.

Let's take a look at the causes and treatment methods of solid wood floor bulging.

First, the reason why the solid wood floor drums to celebrate Sun Kai.

1.Temperature changes. When the temperature changes greatly, the solid wood floor will bulge due to the expansion and contraction of the wood's thermal reputation.

2.Humidity changes. When the humidity of the air changes greatly, the humidity around the floor will also change. Bulging occurs when a hardwood floor absorbs too much moisture.

3.The installation is not standardized. In the process of laying solid wood flooring, improper ground treatment, non-level ground, and non-standard installation operations such as not using suitable glue or sealant between the wood floor and the ground may lead to bulging of solid wood flooring.

Second, the treatment method of solid wood floor drumming.

1.Clear the floor surface. First of all, it is necessary to clean the surface of the bulging floor, remove dust and garbage from the corners, corners and bottom of the wall.

2.Perforated exhaust. Punch small holes with a diameter of 3-4 mm around the drum position on the floor, and the distance between the holes is about 20-30 mm. These holes promote air circulation inside the wood, reducing humidity and preventing the floor from bulging again.

3.Level the ground. Use the Ground Leveling tool to level the ground and flatten the strip to eliminate traces of uneven ground.

4.Hand glue. Make a small hole with a diameter of 3-4 mm in the bulging part of the floor, squeeze the wood rubber into the hole, press down the bulging floor, let it fit tightly with the ground, and after the viscose is dry, cut and grind the surface flat.

In short, the problem of bulging solid wood floors is a big problem for your home environment and aesthetics. Therefore, we should always pay attention to environmental changes when using solid wood flooring, and carry out maintenance in time to avoid such problems. If there is a bulging problem on the solid wood floor, we can solve it with the above treatment.

Generally, there are two types of floor bulges.

1. Edge bulge.

An oval bulge appears on the edge of the floor panel, with a single bag appearing in the middle of the two floors, and a plurality of bags appearing in the middle of the two floors; Some are connected in a piece, showing an irregular distribution in the room.

2. The board surface is bulging.

Oval bags appear on the floor panels, with single or multiple bags appearing in the middle of the flooring at the same time, showing an irregular distribution in the room.

The causes of bulging are roughly as follows:

1) The ground is uneven or there are sand particles on the ground.

Before the installation of laminate flooring, because the ground is not cleaned, there are some small sand particles on the ground or the ground is too rough, after the installation of the floor, in the process of people stepping on it, the moisture-proof film and the balance layer on the back of the floor are destroyed, and the moisture of the ground causes the floor to bulge.

2) Improper handling of moisture-proof measures.

This type of situation is an improper moisture-proof treatment during installation. On damp floors, if the moisture-proof membrane joints are not tightly glued with waterproof tape, even if the balance layer on the back of the floor is not damaged, the floor is in a humid environment for a long time, and the moisture may still enter the floor after the balance layer is eroded by moisture, causing damage to the floor.

3) Improper use:

The bulging phenomenon caused by water ingress at the floor joints (such as: heating running water, large area of water ingress, etc.) belongs to the problem of improper use and maintenance by users.

3.Care Recommendations:

Compared with other wood flooring categories, laminate flooring is not particularly delicate, and daily maintenance can extend the service life of laminate flooring and avoid some problems as long as you pay a little attention to it. In view of the bulging phenomenon, in addition to product quality factors, the indoor ground in daily life can not be flooded in a large area, and the windows should be closed at any time when the rainy season comes, so as to avoid being wet by rain; When cleaning, try to use a vacuum cleaner or semi-dry mop to take care of it, do not use a dripping mop to mop the floor, if you accidentally spill water on the surface of the laminate floor, immediately wipe off the water with a dry cloth to prevent water from leaking from the floor joints.