-
Scrape the top clean and brush with paint. Be sure to keep it dry.
-
The better the adhesion, the better the quality of the coating, the longer it can be used, it is recommended to use Repham smart coatings.
-
Choose a good quality putty and paint Note: The primer must be brushed.
Use a wooden keel to nail the frame directly, and then seal the surface once with gypsum board, and then do the modeling below. Just scrape putty oil latex paint on the back. It means to make two or more layers of ceilings, one of which is to seal the entire ceiling.
Content is better than riches.
1. After the expansion screw is played in the original ceiling and the steel is expanded and hung down, the shock-absorbing hook is connected and the sound bridge is cut off with the shock-absorbing hook. >>>More
First of all, you have to find a designer, then measure your house, listen to your demands, draw renderings, structural drawings, pay attention to a little bit and then show it to Mr. Feng Shui, modify, of course, if you are not satisfied, you can start over. After you are satisfied with the plan, the carpenter will work according to the drawings.